led cupholder lamp overhead console

[Rdriver]

So I installed my overhead console last night and my led cupholder light is the only thing not working. My console came with the complete headliner harness so I expected it to be plug and play. Now I see that the cupholder light wiring isn’t in the harness that runs down the drivers side pillar to the green plug behind the headlight switch, so it must tie in from the rear c pillar portion of the harness? Any info on where the footwell lighting m5 circuit ties to overhead console? My truck has the wire at c6 pin 7 on bcm (2013 tradesman).

 

[Rdriver]

I read every page of the overhead console install in the 4th gen DIY and found that the white and green wire is the single wire in the plug of the passenger c pillar. Mine is plugged in and not working because the ground wire to the two pin connector on the led cupholder light. If anyone knows where this plug gets its ground let me know. If not Ill have to take my console back down and tap a ground from one of the other lights.