Lifted 3rd Gen Pics - Show Em Off!

[Justin G]

 

[02ramboi]

Sent from my iPhone using Tapatalk

 

[Fishstickz]

Sent from my iPhone using Tapatalk

 

[Nik Brasher]

4.5” ICON stage 3 billet with ICON 2.0 res on all 4 corners
18” fuel trophy in anthracite
35-12.50 18 **** cepek tires

 

[CorDog009]

 

[dncr]

Cheers

nice build. what bumper is this?

 

[Ole Buck]

5 inch Rough Country suspension Performance Accessories 3in body lift. 37x12.50x20 Renegades

 

[Flexo]

03 2500 Hemi ,BDS long arm,Nitto 35s

 

[Prism]

Zone 6" w/325/60/20s. Did the install myself. CV shafts don't like it much lol. I might take out the preload spacer that Zone offers. I put the Bilsteins at factory(lowest) setting to. I found that Napa carries cv shafts specifically for our lifted 1500s so I might give them a shot also. There about $250ea.

 

[NicKKielmaN]

Before and After-I had a total of $2900 into this truck.

 

[NicKKielmaN]

3” lift in the front with 3” blocks added to the rear

 

[Lyle Longboat]

Before and After-I had a total of $2900 into this truck.

Did you cut and weld in new rear arch panels or go a different route? Reminds me of my 2005 I bought.

 

[Ole Buck]

5 inch Rough Country suspension Performance Accessories 3in body lift. 37x12.50x20 Renegades

View attachment 488072

But now she looks like this

 

[Lyle Longboat]

One of my favourites on this forum!

 

[Ole Buck]

Night shot

 

[dullers]

I think they look sweet, that is why i am going to get a set at some point, well also the fact i tow with my truck 50% of the time i drive it.

Same. I'm not putting my mirrors down and adjusting them every 2 days just because "you" don't like it.
It's a work truck. I work and tow with it. Get outta here.

 

[christoff]

Just felt a lowered 3rd gen would look really good in this thread, enjoy. lol
View attachment 199049

Haha, I like it….

 

[jolt]

35's on the stock 20's

 

[Sup3rR3dRoost3r]

Tons of mods on my 2005 gen3. Just got amp research power steps installed, they hide under nice you cant even tell when they are folded in. Installing a custom alluminum driveshaft in by fulltorquedriveshafts this week.

 

[Stoffregen Motors]

I use my truck daily, and for towing, so I don't want it tall, but I also drive in snow and on mountain roads, so I need 35" tires to fit. My '03 2500 has one ton springs front and rear, plus a 1.5" lift in the front. That's just enough to give tire clearance.