Looking for a similar wheel to this one, Macho truck?

[Corvette427]

I would like to jump up to a 35” tire, black wheel and paint the bead lock / guard white.

anyone got something similar? Thanks!

 

[Low_Sky]

Well, that being a prototype concept vehicle wheel, you’re not going to find that one.

KMC XD has a boat load of street lock wheels to look through. You’ll have to get your masking tape out to get the “ring” painted.


Sent from my iPhone using Tapatalk

 

[BWL]

Any black wheels with bolt on rings could give you a similar look if you get the rings painted or powder coated.

 

[Sdreeser]

Sota wheels have a similar wheel with that wide beadlock on them that is removable for painting. I looked at them before buying method wheels but they are very pricey!!!! Like $550.00 per wheel

 

[Chrisy]

Mine are close, Mickey Thomsons on custom painted Fuel wheels.

 

[Corvette427]

View attachment 138626 Mine are close, Mickey Thomsons on custom painted Fuel wheels.

NICE!!!!!!!!!!!!

 

[Corvette427]

View attachment 138626 Mine are close, Mickey Thomsons on custom painted Fuel wheels.

are those 35”?

 

[Chrisy]

They are 35" Mickey Thomsons. They are actually 34.77". The wheels are Fuel Trophy, they are offset by 2", making the stance 1" wider with a wider rim and tire. They perfectly match the new Mopar wheel well guards. The beed lock portion and bullet lug nuts were removed for custom painting before installation. The paint was vin# matched, and at the time of the install no fading on the month old truck had occurred. I picked this combo for the exact reasons as stated above. An addition I made was mud guards as I added a 4" dual exhaust with 6" Chrome tips, I wanted them clean. They have RAM embossing in the 1/2" thick rubber. Overall this combo works very well for me after almost a full year now has stood up very well. It almost matches your photo.

 

[Chrisy]

Here's a better photo of the stance.

 

[G. Mcpherson]

Are your Flaps made by Dura Flap!

 

[Chrisy]

I'm not sure who made the flaps, but, I got them from my Mopar dealer.

 

[G. Mcpherson]

I believe they are made by Dura Flap.