genosguy
Member
Mike--thanks for the help getting a PM to Buckeye--no issues this time. Thanks.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I could build you a cargo cam harness to replace the missing factory wiring but it would not terminate with an rca plug. It would have the three factory pins on the radio end that would plug into the radio c1 connector.
Just installed my "Cargo Cam" harness... To say it fits like a dream is an understatement. Totally worth it. Thanks DeereGuy!
Besides the harness, and obtaining the camera, was anything else needed besides the alfaocd programming? And, presumably the security bypass for the OBD on a 2018?
Nope that's all you need. The factory CHMSL with camera, the M2Mods CargoCAM harness, and AlfaOBD to enable the feature. Since yours is a 2018, you will also need the security module bypass for Alfa to work in your truck.
Man these M2MODS guys Mike & Mike. Are just regular O'l American Superstars !!!Just installed my "Cargo Cam" harness... To say it fits like a dream is an understatement. Totally worth it. Thanks DeereGuy!
Besides the harness, and obtaining the camera, was anything else needed besides the alfaocd programming? And, presumably the security bypass for the OBD on a 2018?
DeereGuy's Current Projects
2018 RAM Security Module Bypass - Coming Soon
Enables 3rd party tools to read and clear codes and make configuration changes that are blocked by the security module that was added to the 2018 RAMs.
RAM 4C (UAS/UAQ) Media Hub Adapter Harness - $35
MTC to ATC Conversion Harness - $100
Harness provides the required wiring to convert a truck with either a factory 8.4 radio and manual temperature control or a truck that has been upgraded to a 8.4 radio using the full conversion process. You will also need the cabin temperature sensor and a genie from infotainment. More info can be found at
http://www.ramforum.com/f75/how_add...temperature_control_truck-103456/#post1515362
Heated/Ventilated Seats
Heated/Ventilated Front Seat Harness - $150 shipped
Replaces all missing wires between the driver seat and the passenger seat. Also includes connections for the CAN Bus and the heated steering wheel.
Heated/Ventilated Seats Power Harness - $25 shipped
Replaces missing wires from the PDC to the drivers seat that are needed to power the Comfort Seat and Wheel Module.
Power Seat Harness - $25 shipped
Replaces missing wires from the PDC to the drivers and passengers seat that are needed to power the seat itself.
Please note that these harnesses are not exactly plug and play. You will need to pin terminals into existing wiring connectors in your truck. At this point there is no guarantee what functionality will be enabled in your truck by adding this wiring. Please see the adding heated/cooled seats thread for detailed information or send me a PM.
[email protected]Hi everyone!
Deereguy and I decided to start a little side project to help out our fellow members with various wiring harnesses and mods for some of the smaller projects and threads around the 4th Gen section for our 2013+ trucks.
Each of us will be focusing on specific projects as listed in the next 4-5 posts.
We are calling our joint venture: M² Mods
For now, contact us via PM (with your email & truck specifics so we can send you all the details) . Thank you in advance.
M² Mods
Mpgrimm2 (Mike G.) & Deereguy (Mike D.)
---------------------------------------------------------------
---------------------------------------------------------------
Disclaimer:
Performing these or any modifications to your truck could void your manufacturer's warranty and/or cause issues with the function of the truck. By purchasing and/or installing any of these custom items (harness, bypass plugs, etc) you agree to absolv M² Mods, Mpgrimm2, Deereguy, and all associates of any and all damages that may occur as a result of installing said item. If you do not agree to this provision, please do not purchase and/or promptly return the item(s) for a full refund (less 10% shipping/restock fee). Additionally, we reserve the right to refuse/cancel an order at our discretion.
Hello Mpgrimm2
how do I get the 7sp harness and other necessary equipment to complete my 8.4 conversion. I'm got the screen and the bezel/faceplate. could you please contact me
[email protected]
RAM 4C (UAS / UAQ) Arnés adaptador de concentrador de medios - $ 35
I want to buy the adapter cable for half hub
Your harnesses look great. I'm looking to add the cargo camera to a 2016 2500 with 8.4. I already have the Mopar light but don't want to build a harness. Can you guys hook me up?
Also, I looked unsuccessfully, but do you have a new list of harnesses other than the first page? Thanks
Do you think this Extension harness will work for the 2010 RAM 2500 I have everything else installed. I just need the harness from the PDC to the fog light jumper harness.