Hello all. I have been lurking here for awhile. Finaly posting. I have a question about my truck. i have an 02 1500 2wd 4 door 4.7. when i purchased it it had a 3 in lift which i took off when i did upper and lower ball joints and took the blocks out of the back. The truck still seems to sit high compared to other trucks that are the same model. Is there something im missing? i took the spindle lift off and put oe spindle on. im lost as to why it sits like a 4wd. Thank you for reading!
New Member With questions.
- Thread starter ShaneLane
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Similar threads
Members online
- 06 Dodge
- Daniel12
- Dinky
- Spywiz
- Dickencider90
- crackerjack1957
- AZ MARK
- mb33458
- Rav3ncroft
- Dmoe0911
- Vilianaywd
- Wild one
- raggydoo
- 4xdad
- Dredger
- Slinge
- buckeyexx
- Arthurw
- Woodsrunner28
- David Langford
- RAMET
- TomT
- commander
- CanRebel
- 18harvest
- Docwagon1776
- Riccochet
- datsmer53
- CrazyHarleyGuy
- zstroken
- dieres2010
- CROD
- san1sjd
- Recon5869
- michaelcarlson2
- rzr6-4
- GTyankee
- sigfla
- aszumilo
- sluchak
- Curmudgeon
- Racer9
- Ken226
- Fuelie
- bardownski
- xlcjw72
- andygl
- Mecco22
- Zach2000
- MitchK