Rancho Loaded level w/spacers

[BMD]

They are a hell of a lot better than anything else I have seen!

 

[cableguy_hd]

I installed the quicklifts last night. I previously had a spacer on installed by les schawbs. I was hoping to see a lil more height with the ranchos. That was not the case. But I installed ranchos on all 4 corners and the ride is much better. I also installed airlift 1000s. I'm towing my trailer this weekend. That's the real test. I haven't jumped to 35s yet. I might wait for the 33 toyo MTs that I have on now wear down a bit. I have been putting some serious thought into a zone body lift 1.5". Been trying to find some pictures of trucks with the ranchos and BL.

how did it tow and much weight did you have behind you?


BMD- can you adjust the height of these or just the dampening? I've seen that theres a knob on the bottom to adjust, didn't know if the height was set at 2.25 and the only adjustment was just the dampening

 

[johnson]

Towed great. Ran all four corners at 9 and it rode great. Trailer is 4000 dry. So I would say around 4800 lbs.

 

[KCTHUNDER]

Whered ya get your ranchos from?

 

[BMD]

From bully's performance one of this forums sponsors quick to ship I would recommend them if interested in ordering them.

 

[Pigeonman]

How did those Gorilla Lug Nuts work out? Was the link provided the right size?


Sent from my iPad using Tapatalk

 

[BMD]

The gorilla lug nuts were perfect exactly like stock but steel and no cap and the black looks great will post pics tomorrow

 

[BMD]

She is digging the pink ram on the front and have 4x4 done working on rear emblem as I chipped it pulling the tape so having to sand and re paint.

 

[yodge]

You still have wheel spacers ?


2013 Ram 1500 Express QC
5% tint, daystar leveling kit, straight piped exhaust, plastidipped emblems, 17" rims with nitto AT, rigid pods behind the grill, 40" bar lower grill, strobes, three pods on my tailgate, tailgate bar, CB/PA, tinted tail lights, 8K HID Low and fogs, led cargo and license plate lights, mossy oak weather floor matts, maxtrac 4.5" spindle lift with leveling kit. 7" lift.

 

[SIhemi]

Just ordered these.

Rancho Part RS999367 - RS9000XL Series Shock Absorber - - 4 Wheel Parts

Rancho Part RS999930 - 1.75 Inch Loaded QuickLIFT - - 4 Wheel Parts

 

[jbr]

Just ordered these.

Rancho Part RS999367 - RS9000XL Series Shock Absorber - - 4 Wheel Parts

Rancho Part RS999930 - 1.75 Inch Loaded QuickLIFT - - 4 Wheel Parts

I think the right and left Quicklift have different part numbers

Rancho Quicklift (right Part #RS999930)

Rancho Quicklift (left Part #RS999944)

Edit :sorry these are for 2013

 

[jbr]

Nice!!

 

[SIhemi]

Since this is my first truck. I really don't order online. I like to call and actually speak to someone. They were very helpfull on the phone. Made it very easy for a novice like myself.

 

[coolgreen13]

I think the right and left Quicklift have different part numbers

Rancho Quicklift (right Part #RS999930)

Rancho Quicklift (left Part #RS999944)

Edit :sorry these are for 2013

Will these work on a 2014? I dont see any part numbers for 2014.

 

[UneasyJmitchell]

Have you measured the 295 tire? Is it 34 or 35 inches? Looks great. And the Ranchos only adjust softness and stiffness and NOT height?

 

[hotrodderscott]

Will these work on a 2014? I dont see any part numbers for 2014.

yes I just ordered a set today from Bully Performance.
AWESOME customer service!
Rancho also has a $125 mail in rebate going on!