Rear wheel spacer only pics please

[Tpearson515]

Has anyone put rear wheel spacers in only to make the tires sit flush on the bed similar to how the front tires sit?

I've had 1.5 hub centric spacers on for all 4 for the past couple years. Thinking of switching it up, wondering if a 1/4 inch spacer on the rear only would do the trick?

Any pictures of this would be greatly appreciated!

Sent from my SM-G955U using Tapatalk

 

[Wild one]

Has anyone put rear wheel spacers in only to make the tires sit flush on the bed similar to how the front tires sit?

I've had 1.5 hub centric spacers on for all 4 for the past couple years. Thinking of switching it up, wondering if a 1/4 inch spacer on the rear only would do the trick?

Any pictures of this would be greatly appreciated!

Sent from my SM-G955U using Tapatalk

No pic's,but I run a 6mm (1/4") spacer on the rear ,in conjunction with my narrowed Mcgauphy dropped spindles.The drop spindles were narrowed 0.650" to bring the front wheels back in,and with a 6mm spacer on the rear it kind of has an old school look with 305/50/20's on the rear and 295/45/20's on the front. I can post a pic on a facebook page for you,but have never had any luck getting a pic on here.

 

[MidwestJ]

No pics OP but I was wondering this: if the spacers would need to be staggered somewhat for a flush look.

I guess this is what you’re saying.

 

[never-enough]

No pic's,but I run a 6mm (1/4") spacer on the rear ,in conjunction with my narrowed Mcgauphy dropped spindles.The drop spindles were narrowed 0.650" to bring the front wheels back in,and with a 6mm spacer on the rear it kind of has an old school look with 305/50/20's on the rear and 295/45/20's on the front. I can post a pic on a facebook page for you,but have never had any luck getting a pic on here.

I would love see pics of this, I’m working towards something similar now.
When I post pics here I use the Tapatalk app, it makes it easy.

 

[Tpearson515]

No pic's,but I run a 6mm (1/4") spacer on the rear ,in conjunction with my narrowed Mcgauphy dropped spindles.The drop spindles were narrowed 0.650" to bring the front wheels back in,and with a 6mm spacer on the rear it kind of has an old school look with 305/50/20's on the rear and 295/45/20's on the front. I can post a pic on a facebook page for you,but have never had any luck getting a pic on here.

That does sound pretty nice, my setup is pretty different as I'm still on stock rims with 275 65 20s ,

Sent from my SM-G955U using Tapatalk

 

[Tray Burge]

I have 22" x 10" but had to put spacers on the back after the drop and the drop spindles up front poked my front tires out past my back. Corrected now.