Retro'd

[0212353]

no? you don't have to use all the parts that come with the kit, its a universal kit. Use the small one.

 

[TheMaddog]

Alright. That what I was hoping. I just dremmeled a bit off. It'll still fit. Just wanted to get the metal nut as far down as I could.


Sent from my droid killing iPhone using Tapatalk

 

[0212353]

I have never dremel'd that. Use the small grommet and it will fit just fine.

 

[garner]

We need pics!

 

[TheMaddog]

I have never dremel'd that. Use the small grommet and it will fit just fine.

For some reason I thought that I needed both rubber washers. But alright.

Pics are on the way


Sent from my droid killing iPhone using Tapatalk

 

[TheMaddog]

Sent from my droid killing iPhone using Tapatalk

 

[TheMaddog]

Removing the sealant.


Sent from my droid killing iPhone using Tapatalk

 

[TheMaddog]

Projector

tinted reflector

All dry fit. Not done yet


Sent from my droid killing iPhone using Tapatalk

 

[TheMaddog]

Could I use the 5m exterior tape to put my heads back together? I'm gonna use silicone after.


Sent from my droid killing iPhone using Tapatalk

 

[05singlecabHEMI]

I dont know alot about headlights, but id say just silicone it. Dont mess with tape...

 

[WhiteExpress]

Could I use the 5m exterior tape to put my heads back together? I'm gonna use silicone after.

Sure, but I wouldn't.

 

[0212353]

butyl is best, silicone over that for some added protection.

 

[TheMaddog]

yes sir!

1 light down, 1 more to go, and then HID goes in.

 

[TheMaddog]

Done. Will install the hids tomorrow along with the heads.


Sent from my droid killing iPhone using Tapatalk

 

[0212353]

cool.

 

[TheMaddog]

My self made punishment was brutal. I'm never, I repeat. NEVER doing that again, JJ You now have a new customer. But not until something happens to my current ones


Sent from my droid killing iPhone using Tapatalk

 

[0212353]

lol, I remember saying that I would never open another light again too.

My first set was my OEM lights from my 08. Took me about 6-7 hours to get them open. My 4th Gen took me......about the same. If that were the case now, I wouldn't be doing this.

Just curious, how much time do you have in the project?

 

[TheMaddog]

2 hours to open each.
2-3 weeks for whole project. Got busy with a lot of school work and etc.



Sent from my droid killing iPhone using Tapatalk

 

[TheMaddog]

Missing more stuff. Resistors and the headlight connector.


Sent from my droid killing iPhone using Tapatalk

 

[0212353]

What exactly did you order Sam?

Pics?