Stance Showcase -24 and larger

[Mr.AK902]

Although not for everyone, I'm a big fan of those - offsets. Every truck I've owned has been in the -'s. Currenty waiting on a set of -51 20'12's for my 17 sport.

That being said, lets see those deep dishes -24 and larger. There isn't much on here for threads specific to the larger offsets that i could find. This could be a nice little gallery for those looking for good visuals before they purchase... not everything has to be viewed on custom offsets site

 

[goodguy11]

Sent from my iPhone using Tapatalk

 

[WiSH2oo0]

I really like the fuel Maverick Wheels when I bought them. I ended up buying the 20x10 with -12 offset only because the 20x10 - 24 offset had the same lip measurements.

 

[Rzrman328]

You're probably not gonna get very many participants here....at least past -24.

Most on the forum stick with the closer to flush look.

 

[N1ck]

Here is 20x10 -24 I am dissapointed with the amount of poke, mainly due to the factory fender flares. I’d like to do 20x12 -44 but I don’t want to shell out the coin for new wheels.

 

[N1ck]

This one is on 305/50/20 tires

 

[Mr.AK902]

You're probably not gonna get very many participants here....at least past -24.

Most on the forum stick with the closer to flush look.

That's ok, those of us that do enjoy the stance will have a place to share some pics and info.

Here is 20x10 -24 I am dissapointed with the amount of poke, mainly due to the factory fender flares. I’d like to do 20x12 -44 but I don’t want to shell out the coin for new wheels.

Sharp rig, I know what you mean with the lack of poke. I put a set of -24's on a previous truck and it was ok until i saw a set of -44's on the identical truck lol. One of those things when bigger is better IMO.

 

[Mr.AK902]

Here is 20x10 -24 I am dissapointed with the amount of poke, mainly due to the factory fender flares. I’d like to do 20x12 -44 but I don’t want to shell out the coin for new wheels.

Could always sell and upgrade? 12 wides would look great on that thing

 

[Dangulo]

I don't think you'll see 24's on the 1500's with larger than 37's but here is mine

20x10's -24 offset. The lift pushes the front out another 1" so the rears have 1" BORA spacers.

 

[Dangulo]

Another angle from a different day

 

[N1ck]

Could always sell and upgrade? 12 wides would look great on that thing

I’ve thought about it but I really don’t want to level and I don’t think I’d clear on 33x12.50x20’s

 

[Mr.AK902]

I’ve thought about it but I really don’t want to level and I don’t think I’d clear on 33x12.50x20’s

You clear the 12 sides on a level with 33s no problem. Do it I k ow you want to !

Sent from my SM-G930W8 using Tapatalk

 

[N1ck]

You clear the 12 sides on a level with 33s no problem. Do it I k ow you want to !

Sent from my SM-G930W8 using Tapatalk

*i don’t want to level* if anything I want to lower the rear end more, low and wide stance.

 

[N1ck]

Well I bit the bullet on some 20x12-44 Wheels. Now to see if they clear at stock height on 33x12.5x20 rubber...

 

[Mr.AK902]

Well I bit the bullet on some 20x12-44 Wheels. Now to see if they clear at stock height on 33x12.5x20 rubber...

Jeez that was quick! Keep us informed here if you wan't. I'm happy for you lol. If you can't fit em with 33's stock height let me know. If you do, ill be going to stock height on mine and doing a reverse level. There is a ton of room in those wheel wells, not much metal interference either. I don't mind trimming plastic back at all.

 

[Mr.AK902]

Well I bit the bullet on some 20x12-44 Wheels. Now to see if they clear at stock height on 33x12.5x20 rubber...

Whooooo N1ck i just realized were in the same city.... gotta meet up sometime. Now i'm REALLY curious about the rim fitment. I'm over in the south, Harbour Landing

 

[N1ck]

Whooooo N1ck i just realized were in the same city.... gotta meet up sometime. Now i'm REALLY curious about the rim fitment. I'm over in the south, Harbour Landing

Lol not many Canadians on here let alone from Sask. check out true north rams on Facebook. I’ve got a set of 305/50/20’s as well that are a hair smaller which I think I’ll run. I’m in the greens on gardiner.

 

[JB1]

I go back and forth about putting 12 wides with my 37's. I have plenty of room to clear, I'm just concerned about the extra wear and tear on suspension items.

 

[Mr.AK902]

Lol not many Canadians on here let alone from Sask. check out true north rams on Facebook. I’ve got a set of 305/50/20’s as well that are a hair smaller which I think I’ll run. I’m in the greens on gardiner.

Did you manage to get the new dishes mounted n1ck?

I go back and forth about putting 12 wides with my 37's. I have plenty of room to clear, I'm just concerned about the extra wear and tear on suspension items.

They'll look good too. I say do it, can't say i've ever had excelerated wear on the front end although it gets talked about lot.... x14 is probably a different story

 

[N1ck]

Did you manage to get the new dishes mounted

Not yet. I have a set of TPMS in Plentywood Montana to pick up, I want to install the sensors at the sametime. Might head down there on the weekend and pick them up and get the rims on Monday.