Steering Column Control Module (Cruise Control)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tangent

Senior Member
Joined
Jan 10, 2016
Posts
263
Reaction score
263
Location
Montgomery, TX
Ram Year
2016
Engine
3.6 Pentastar
Anyone replace theirs to get their cruise control to work.

Looks like you have to take the wheel off, but a new one fixes the intermittent cruise control issue to where it won;t turn on.
 

pedersen_tim

Member
Joined
Feb 22, 2018
Posts
77
Reaction score
93
Location
US
Ram Year
2015
Engine
Hemi 5.7
Did you get the recall done?

Sent from my SM-N960U using Tapatalk
 
OP
OP
Tangent

Tangent

Senior Member
Joined
Jan 10, 2016
Posts
263
Reaction score
263
Location
Montgomery, TX
Ram Year
2016
Engine
3.6 Pentastar
I just now saw my half-assed post and am embarrassed.

I've had the intermittent problems with my cruise on/off button not working all the time. I read up on it and do the thing where you flick the button or karate chop the steering wheel, or even turn the key to 'on' for a few seconds before you start the truck. All of that works sometimes.

I was on the interstate and tried to flick the button, but hit the gear button instead and geared down at interstate speeds, then one time in traffic I hit the wheel on the side and almost swerved and hit an oncoming car. So this is getting dangerous and I just want it fixed.

I did get the recall done this past Summer, but that didn't fix the issue.
 
Back
Top