Great looking trucks!
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
1945 was when production started and 46 was the first year model.What was the 1st year of the Power Wagon??
I know a guy has 2 and he says 1 is a 40 the other is a 41
Black 20 Ram
Very nice!!Got a 46WDX number 993 off the assembly line in Detroit. Shipped to Missoula MT - factory options included: winch, overflow tank, rear pulley, draw bar - color RED: In the process of complete frame off restoration. Axles, transmission, transfer case and steering box are all done. Working on the frame ready for paint and engine is torn down for rebuild.
1945 was when production started and 46 was the first year model.
I could not find any thing to support the 1940&41 to be a PW, but I am not that versed.
https://www.dodgepowerwagon.com/main/intro.php
https://en.m.wikipedia.org/wiki/Dodge_Power_Wagon
Wow!! That is very nice. Is it a 5’ bed in length now? That means you cut your frame and shortened your drive shaft as well. Also you got a new fuel tank?Finally got my new bed built. I drew a lot of inspiration from these old amazing wagons. Had to try and blend some new and old to make it work. Think it’s pretty good myself
View attachment 218048
View attachment 218049
View attachment 218050
View attachment 218051
View attachment 218052
Bed length is right at 50” not counting spare tire holder. I cut 31” of frame and 18”ish off frame behind axle. New 1 piece drive shaft was made. And I did manage to squeeze the stock 32gal fuel tank into stock spot. I had to cut a hole under driver rear seat to allow connections room. Sealed floor up and cleaned it all up. Was with the sacrifice of floor storage lol.Wow!! That is very nice. Is it a 5’ bed in length now? That means you cut your frame and shortened your drive shaft as well. Also you got a new fuel tank?
You have close to a 4 door Jeep wheel base now?!Bed length is right at 50” not counting spare tire holder. I cut 31” of frame and 18”ish off frame behind axle. New 1 piece drive shaft was made. And I did manage to squeeze the stock 32gal fuel tank into stock spot. I had to cut a hole under driver rear seat to allow connections room. Sealed floor up and cleaned it all up. Was with the sacrifice of floor storage lol.
Helgas Adventures in members rides. It’s all in thereYou have close to a 4 door Jeep wheel base now?!
Probably won’t be Seesawing on your rocker panels anymore. Nice build.
I would like to see you do a build thread.