SouthTexan
Senior Member
- Joined
- Jan 24, 2015
- Posts
- 2,149
- Reaction score
- 1,305
- Ram Year
- 2014
- Engine
- 408 CTD
I am working on it. Been busier then a one legged man in an ass kicking contest.
Will this leveling spring work?
- Thread starter zeddy
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I am working on it. Been busier then a one legged man in an ass kicking contest.
OP
OP
zeddy
Senior Member
Just pulled the trigger and ordered the thuren 3inch w/ the overlander shocks.
SouthTexan
Senior Member
- Joined
- Jan 24, 2015
- Posts
- 2,149
- Reaction score
- 1,305
- Ram Year
- 2014
- Engine
- 408 CTD
You will need a 1" rear spacer for that kit as well since the 3" kit will make the front higher than the rear. Unless that is the look you are going for.
OP
OP
zeddy
Senior Member
no spacer in the rear. I don't want it level. I want the front slightly higher than the rear.
SETEX 6.4
Senior Member
- Joined
- Apr 28, 2014
- Posts
- 760
- Reaction score
- 353
- Location
- Port Neches, TX
- Ram Year
- 2014
- Engine
- Hemi 6.4
IMO you made the right decision.
Can't wait to see pictures.
Sent from my SAMSUNG-SM-G891A using Tapatalk
reloaderguy
Senior Member
- Joined
- Apr 26, 2015
- Posts
- 570
- Reaction score
- 314
- Location
- Oregon
- Ram Year
- 2016 Power Wagon
- Engine
- 6.4 Hemi
A 1" spacer might barely be level. The Thuren 3" springs are taller than 3".
OP
OP
zeddy
Senior Member
That's why i called them and told them to send me a 2inch instead. I was worried about the extra stress on the components w/ the 3inch, risk of it being higher than I want and not fitting in the parking structure at work. I feel better switching to the 2 inch, and I don't have to adjust my carli track bar, I can just slap it on.
OP
OP
zeddy
Senior Member
Ahhhhhhhaahahahaha. I got my thuren 2inch springs and shocks in.
Boy are these springs beefy. At first they looked short. But when I compared them to the stock, they're long. They're thicker than the factory. I'll get the new 35s mounted on my fuel vectors Fri and install them sat. Can't wait!!!!!
Sent from my SM-G935V using Tapatalk
Boy are these springs beefy. At first they looked short. But when I compared them to the stock, they're long. They're thicker than the factory. I'll get the new 35s mounted on my fuel vectors Fri and install them sat. Can't wait!!!!!
Sent from my SM-G935V using Tapatalk
Phil21502
Senior Member
Pics with the springs? I wanna see how level the truck looks
OP
OP
zeddy
Senior Member
Got my thuren 2inch springs and shocks installed. Took me and uncle about 45 mins to complete. Super super easy. Came out better than i wanted. I'm so glad I didn't get the three inch.
Before and after
Sent from my SM-G935V using Tapatalk
Before and after
Sent from my SM-G935V using Tapatalk
OP
OP
zeddy
Senior Member
BiGMERF
Senior Member
Got my thuren 2inch springs and shocks installed. Took me and uncle about 45 mins to complete. Super super easy. Came out better than i wanted. I'm so glad I didn't get the three inch.
Before and after
Sent from my SM-G935V using Tapatalk
Dayum you close to that wall. Lol. Good looking truck brother
Sent from my SM-G935V using Tapatalk
Man that looks good, the 2" level is perfect!
OP
OP
zeddy
Senior Member
Thank you.
I first wanted the 3inch. I'm so glad I got the 2inch instead. It's perfect. Exactly what I wanted.
Sent from my SM-G935V using Tapatalk
Similar threads
