Reo Cook
Senior Member
- Joined
- Jun 26, 2012
- Posts
- 264
- Reaction score
- 22
- Location
- Houston
- Ram Year
- 2014 1500
- Engine
- 5.7L HEMI
Think I'm gonna pull my lift off and go low. I have the 7" front & 3" rear maxtrac lift with 37x1250s now, but after riding around I want to go the other way.
I have read that the McG spindle kit is good, but there are issues with the 13s and up with the spindle needing some work. I am thinking about going with the Belltech 2/4 kit and some 305/50s.
Am I crazy for wanting to go this route? I think what I'll do is buy the parts I need to do the drop and then sell my lift and tires to recover the price of the parts.
Suggestions or comments?
I have read that the McG spindle kit is good, but there are issues with the 13s and up with the spindle needing some work. I am thinking about going with the Belltech 2/4 kit and some 305/50s.
Am I crazy for wanting to go this route? I think what I'll do is buy the parts I need to do the drop and then sell my lift and tires to recover the price of the parts.
Suggestions or comments?