need your opinion

TheBlackBeast · Feb 10, 2015

So I have a 4x2 2014 ram black express and I currently purchased a 2 inch leveling kit to make the beast look all leveled. I also purchased 1.5 inch spacers for my 20x9 wheels so they can stick out more.Im sticking with my stocks for now. Question is can I run a 35x12.5r20 tire or will it Not fit?

Pictures is currently lowered but it will have stock suspension and 2 inch spacer this week.

14RamRod · Feb 10, 2015

Everyone saying a level and 35s will fit without rubbing. You could always go with a 6inch suspension lift if you do though.

brandonjansen · Feb 10, 2015

With only a 2" level and the 1.5" wheel spacers you'll rub for sure. If you don't want any rubbing you'll need more front end lift and smaller wheel spacers. Typically for a 35x12.5 tire you want at least 2.5" of front end lift. A 20x9 +19 offset wheel (stock) with a 1.5" wheel spacer equates to a 20x9 -19 offset. I ran 20x9 -12 offset with 35x12.5 Toyo MT's and a 2.5" level on my old 1500 and had a slight amount of rubbing on the back of the inner fender with those already. Your rubbing would be quite a bit worse. You could make it fit with some trimming if you really wanted to go with that setup.

TheBlackBeast · Feb 11, 2015

I'll probably try a 33x12.5r20 or a 295/60r20 with 1.5 spacers

RyanJM · Feb 11, 2015

With only a 2" level I would have to agree with about on going with a 33x12.5 or a 295/60 tire.

Saltbreak · Feb 13, 2015

These are 18x9 0 offset. 295 70r18. Which is like 34.2 x 11.7 all I have is bilsteins at 2.1. No rubbing.

Sent from my iPhone using Tapatalk

need your opinion

TheBlackBeast

Junior Member

Attachments

14RamRod

Member

brandonjansen

Senior Member

TheBlackBeast

Junior Member

RyanJM

Senior Member

Saltbreak

Member

Similar threads

Latest posts

Members online

Forum statistics

Share this page