RF Tactical Grill Pics

[SnoRider]

Does anyone who bought one of Rubber Frog's Tac Grills have pictures of it and install pics (i.e. back side of it with mounting brackets, etc)? thanks.

 

[ramhunter9]

Here is my old truck , I dont have any inside pics tho , some one that has one installed might be able to snap a few pics ..

But here is the outside

 

[wermbang]

Dang I had some pics in my PM but deleted the PM.

 

[KGBIGCOUNTRY]

Dan shoot Danny a PM he should have some good pics of the install knowing him.

 

[03MopaRamman]

I'll check my pics, not sure if i took any of the actual fitment process.

 

[KSMegaOwner]

Glad I didn't buy one of these now.

 

[EJM05]

Glad I didn't buy one of these now.

Why?

 

[SnoRider]

Thank's Danny. If you don't have install pics, could you snap a few pics of the mounting brackets when you have some time?

 

[wermbang]

I can get some of mine tomorrow if needed too. Mine use the same brackets.

 

[SnoRider]

Wermbang - That would be great, thanks.

 

[03MopaRamman]

Thank's Danny. If you don't have install pics, could you snap a few pics of the mounting brackets when you have some time?

OK, I'll make a note to do that tommorrow! Give me a couple days as I am real Busy this week.

All I can say is This Mod install is not for the Impatient and I rate it on a scale of 1-10 difficulty as a 7....it was trickey to get both 2 x sides perfectly matched and to fool the eye on the overall finished look , however with some tweaking of said brackets I was able to get it satisfactory and overall the price was Great.

 

[wermbang]

^agreed

I for got to get those pics too. I will try for tonight.

 

[EJM05]

All I can say is This Mod install is not for the Impatient and I rate it on a scale of 1-10 difficulty as a 7....it was trickey to get both 2 x sides perfectly matched and to fool the eye on the overall finished look , however with some tweaking of said brackets I was able to get it satisfactory and overall the price was Great.

Huh. Interesting

 

[Badger]

I wish I would have gotten one before frog went rogue and disappeared from existance.

 

[rambob]

I wish I would have gotten one before frog went rogue and disappeared from existance.

we need to get luke to make some.

 

[nussdawg395]

I wish I would have gotten one before frog went rogue and disappeared from existance.

we need to get luke to make some.

x's 2 x's 2!!!

 

[Badger]

Cough cough Luke you know what to do cough.

 

[03MopaRamman]

Daniel, Got a few pics while waiting to load our Trucks for the day DownRange.
Took a pic of every Bracket and tried close-ups of where I tweaked the grille. A couple are blurry but no worries. Too late to download from my phone and then up to PB then here tonight as I'm too bagged. Another note on my lunch Bucket for tommorrow: ).

 

[wermbang]

yeah yeah. Wont be for a bit on that

 

[03MopaRamman]

Ha, Ha, Luke, that only applies to my Shifter Thread.

So got pics of the grille brackets, so then to add to my previous comments and some additional notes on how I got this thing lined up as best I can remember.

At the end of the day you want all 4 outer corners (top/bottum) to be equally matched up to the chrome surround of the grille.






And then the Middle.

As you can see below I decided to line up the bottum horizontal Flow and live with a slight mismatch at the Top as both L and R pieces are not identical (you can see in the close-up). Frog did a pre bend on them so that gives you a start as to which side goes where.




Ok Suppers up. Will post inside bracket pics next (in a Bit). Thanks