boomer632
Senior Member
- Joined
- Jan 31, 2017
- Posts
- 153
- Reaction score
- 45
- Ram Year
- 2013
- Engine
- 5.7
Im about to do my sub install later today and have two questions before I start to tear it apart..
I have the 72-6517 harness and see the spade connectors wont plug into new sub. I am guessing that all of you just cut the spades off, stripped a bit of wire back then inserted said wire into spring loaded wire connector on the new sub?
There are 2 factory wires and 2 connectors on the sub. How do I tell which wire goes to which connector or does it not matter?
Thanks in advance..
I have the 72-6517 harness and see the spade connectors wont plug into new sub. I am guessing that all of you just cut the spades off, stripped a bit of wire back then inserted said wire into spring loaded wire connector on the new sub?
There are 2 factory wires and 2 connectors on the sub. How do I tell which wire goes to which connector or does it not matter?
Thanks in advance..