cdyt7717
Member
hey guys, a little advice needed. So i bought a new stereo and a backup camera to install. I've had the stereo installed for awhile now and everything works great. The stereo switched to the reverse cam input when I shifted into reverse and all was good. I went to wire up the camera yesterday and I guess I had a stupid moment. I wired the trigger from the camera to the trigger wire coming from the stereo wiring harness. I realized my mistake but now the reverse trigger wire is always hot with a constant 5-6V. i tried to disconnect the battery to reset anything but it turns the stereo to the rcam as soon as i startup the truck now, and does not turn to the cam when in reverse. any ideas or suggestions?
