You might have to find the connector for the LED cup holder light but I’m not sure, mine didn’t come with it so I had to make one.
One other tip and I know you will like this one, when cutting the headliner, start small, really small and work your way out until you get what you need. I had the benefit of several work trucks that had the console so I just dropped one and made myself a template. When you get your console in you will be able to see that it’s two pieces, the black piece can be removed from the grey or brown and that will be close the size hole you will need in headliner. Be very careful towards the windshield as the cutting gets close. The front of the console rests on the lip of the headliner. Take a deep breath before you cut and then go slow, it’ll be messy this way but hopefully you make a hole that’s to big.