2003 navigation??

[kajunboy89]

did the 03's come with nav?? or do i have to do like the other thread and engineer a bezel to fit a double din????????????

 

[shadow11]

You can get the RB1 or RB4 stock nav for your truck. However they are really pricey and don't really have that many features. Thats the reason I sold my stock nav and am upgrading to a double din cause you get a whole lot more features and a good double din will be the same price or cheaper than the stock nav.

 

[kajunboy89]

i reallllly dont want to cut, bondo, and fiberglass my bezelll
i HATE fiberglass and bondo... i had to do enough fiberglass work with my boat...

 

[shadow11]

I don't like bondoing either thats why you pay Weed to do it and it will come out perfect. He is making my bezel and it should be in sometime next time.

 

[kajunboy89]

how much was it??

 

[shadow11]

$120 and he will refund you $30 if you send him your old bezel so it would be $90

 

[kajunboy89]

thats not bad at all... any trimming or cutting of anything when you put in your nav?

 

[shadow11]

You talking about the new double din I just got?

 

[kajunboy89]

yes

 

[Silverbullet08]

yea u have to trim inside the dash...

 

[bigtigga84]

i love having an 06 =0).

 

[shadow11]

You have to trim some of the plastic inside the dash so the double din will fit. Its not very hard. I stared trimming with my dremel but it was taking too long so I just took the blade off a hack saw and went to town cutting with it. It was much easier then using the dremel and probably took me 15min to trim everything.

 

[kajunboy89]

i love having an 06 =0).

and i love paying less than 10k for a truck with 28 thousand miles :********:

 

[ramthis9501]

If it's just Nav you want, just get a Garmon lol better then cutting up your dash

 

[kajunboy89]

gots a tomtom
i just want to watch hot girls dance to my music when i drive.

 

[Silverbullet08]

dremel took me 5 mins. and it doesnt even looked like i cut it. i smoothed it down and everything. no one sees it too

 

[shadow11]

dremel took me 5 mins. and it doesnt even looked like i cut it. i smoothed it down and everything. no one sees it too

I cut a big hole kinda underneath where the dd sits so I could pull the wires out like where the climate control is cause there was no way all those wires were going to fit behind it.

 

[bigtigga84]

and i love paying less than 10k for a truck with 28 thousand miles :********:

you win lol

 

[kajunboy89]

well, im a lazy ******* and if anyone wants to do it for me, i'll pay and help you drink beer while you do it.
spent a few hours wiring my boat for my radio the other night and said F it, i'll never wire anything again

 

[Silverbullet08]

I cut a big hole kinda underneath where the dd sits so I could pull the wires out like where the climate control is cause there was no way all those wires were going to fit behind it.

did for me and i have a relay back there lol