Mikeknale7905
Junior Member
I have 2012 1500 express with a 4in rc lift kit. I want to replace the upper control arms. What kind of upper control arms are out there. I don't need the best but I don't want the cheapest one either.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
What kind of upper control arms are out there. I don't need the best but I don't want the cheapest one either.
What lift kit do you have on your truck.The mevotech UCA would be your least expensive factory replacement.
The Zone control arms are probably your next choice. They are heavy duty and correct for the angle/length needed. After that I think rough country makes some that cost a little more and then if you want look at ICON and few others that are $800 and up for the pair.
I went with the Zone arms on mine, I also liked the fact that they use a Moog BJ that can be sourced locally if ever need be.
View attachment 118527
What lift kit do you have on your truck.
Id like to try the new Maxtrac ones.
The rough country ones are not for a 4in liftThe Mevotech ones are still factory geometry? they are just a better design ball joint right?
I found some Rough Country Ones for $300 that seem to have better ball joint anfd geometry
The Maxtrac ones will.Do you guys know what would fit a RC 6 inch lift 2wd 2019 ram 1500 classic , no I won’t be off road very often only when we go to deer lease but it’s not treacherous terrain . I have stock upper control Arms that came with truck out of factory
The only issue I had with my JBA’s was the color. Had them powder coated black. Much better! Gained 2” of wheel travel when they turned black too.I went with the JBA UCAs. They are built well and at the lower range of the expensive scale. I like them and have had no issues.
View attachment 179954
View attachment 179955
I went with the JBA UCAs. They are built well and at the lower range of the expensive scale. I like them and have had no issues.
View attachment 179954
View attachment 179955