Search results

  1. B

    Help before I spend $1400

    Well checked both ends and did adjustments. Still have the high rpm shift into 3rd. So any other thing to do before just getting another trans?
  2. B

    Help before I spend $1400

    Thanks I will check both ends of it and see what is going on. I want my truck back. Put so much into it. Don’t need it to be sitting in the yard
  3. B

    Help before I spend $1400

    long story short is I have a 01 1500 4x4, it had a 98 trans put in it. I swapped the sensors and the wiring(all new) inside the trans over to be compatible with the 01. What the trans is doing now. 1-2 shifts are fine. The 2-3 shift is a high rpm shift, when it does shift it is a smooth...
  4. B

    Harness swap to fix trans?

    Sounds good but just swapping engine harness an pcm work as well?
  5. B

    Harness swap to fix trans?

    That is a different plug on the harness inside the trans. So it want plug in.
  6. B

    Harness swap to fix trans?

    Ok long story very short. 01 1500 4x4, had a trans from a 98 4x4 put in. Well it runs but it want shift right b/c wrong trans with wiring harness an computer. So if I swap the harness an computer ( an other stuff injectors o2 etc) in theory every thing should work right with the trans. Am I...
  7. B

    Trans problems

    The plug for the sensors are not the same on the early vs late. Did a new filter an fluid when put the sensors in. If it is a pcm thing then will have to change over pcm, wiring harness, injectors and the o2 sensors.
  8. B

    Trans problems

    The cables are fine on it. Talked to a few places one said it was the torque converter and another said it was seals on the pump.
  9. B

    Trans problems

    Got a 01 1500 with 5.9 in it. Motor blew so had a 98 motor and trans swapped in. Nothing was wrong with the 98 trans before the swap. I was having some shifting problems with it going high rpm before it would shift into second. So replaced the gov pressure sender an switch. Got the right amount...
  10. B

    Temp gauge goes to red before start up.

    2001 1500 5.9l Got a cel for temp over range an check gauge light. The temp gauge will go to the max in red with the key in the on position an stays there even when started up. It will go back but once power is off. I got a new temp sensor an still have the same thing going on. This is the...
  11. B

    pulling infinity system

    What all is needed in pulling the system out an putting in another truck. I already have the speakers an tweeters out an head unit
  12. B

    Pulling infinity system

    Sorry wrong gen.
  13. B

    Pulling infinity system

    What all is needed in pulling the infinity sound system out. I have a parts truck here an it has the system in it. I have pulled all the speakers an tweeters any thing other then that an a few line to swap to another truck?
  14. B

    Engine wiring harness

    he choped the 01 harness an put the 99 in some places. he had messed up the thermo sensor an had the 99 pcm in there. once i fixed the thermo sensor an put the 01 pcm in i got rid of the "no bus" an cel for the thermo. now its cel p0031 an p0037 an the wires are hacked down at the o2 sensors...
  15. B

    Engine wiring harness

    I have a 01 1500 4x4, bought a 99 1500 4x4 parts truck. Had a guy swap motor in mine. The retard hacked both engine harnesses for what i have no clue. An hacked the o2 sensor plugs. The 99 had the plug for the round o2 mine has it for the square plug. So i need to know what year would be the...
  16. B

    No bus an therostat wiring

    I went an swapped the original pcm back in. Started it up an no cel or bus. So glad about that! Now just need to get a good rebuild kit for the 360 with pistons to rebuild my original motor.
  17. B

    No bus an therostat wiring

    Quick update: I swaped the sensor on the motors. The cel comes on an the no bus as well but not as fast. Before as soon as a cracked it would come on, now its 30sec or later that it comes on. I noticed that he used the computer from the other truck, so if I put the org computer back that might...
  18. B

    No bus an therostat wiring

    Long story short motor in my 01 1500 5.9 went out. I bought a 99 1500 5.9 parts truck with a good running motor an trans in it. Had a guy swap motors for me. Got the truck back last night, it has a cel with code p1281, a no bus an the theromstat gauge is not working. I did a little bit of...
  19. B

    Is it lifted or leveled?

    I guess the easyest way to find out how much the front has "leveled" is to just put a tape to the the front spacer. If its the 3'' then would stock length shocks for the front work or would i have to get longer ones?
  20. B

    Is it lifted or leveled?

    Just picked up a 01 1500 4x4. I have a 95 2500 4x4 an selling it, I needed a quad cab vs single cab. The 01 has 34'' tires on it an rub at almost full lock. I belive it needs shocks on it to much bounce. So need to know if it has been lifted or just leveled, before I go an get shocks that may...
  21. B

    Ball joints

    Got a bad ball joint an in middle of get them replaced. Problem is the ball joints are in the knuckle an i have never see this before. Its a 95 2500hd 4x4 . the nuts to hold them where on the top side not facing down like the others. The joints are also the moog if that helps. so any one have a...
  22. B

    changing engine an trans

    Is there any thing to look out for in thing change. I have a 95 2500hd with the 360 an auto trans 4x4, going to take it an put it in a 97 1500 4x4. The 95 has 150k an the97 has 208k an no trans. Do i need to swap wireharness on the motors or any thing else?
  23. B

    squeak from trans

    nope just motor
  24. B

    squeak from trans

    Don't have to its not them. Turn the truck on, press on brake, shift into drive, keep the pedal mashed an it makes the sound. If I shift it into nut then it stops the sound.
  25. B

    squeak from trans

    I have a 95 2500 heavy duty, it has the 5.9 gas in it, auto, an 4x4. There is a squeak sound when I put it into drive or reverse. It will go away some times at speed then when I let off of the gas it comes back. Checked the fluid in it and it is not low. Is there any idea of what it could be? I...

Latest posts

Members online

... and 6 more.
Total: 1,207 (members: 56, guests: 1,151)
Robots: 1,605

Forum statistics

Threads
195,699
Posts
2,873,459
Members
156,575
Latest member
avdominguez82

Share this page

Top