'12 Headers

[jonathanhudaon]

Yup looked into it more those arb the Chinese junk. I won’t go no lower then JBA. Found another set for a grand


Sent from my iPad using Tapatalk

 

[KUSTOMKREETURE]

I think im ordering from summit. they have the coated stainless ones on there for 663. And from them if they have **** welds I can keep sending them back until I get a set that meets my approval.

 

[VB712]

A lot of labor changing headers to go cheap and have to replace several times.

 

[KUSTOMKREETURE]

I can change them a few times for the $1000 price difference. And if they were that ****** JBA wouldn’t continue producing them.

 

[Hemi450hp]

After having run both, I will always stick with ARH. The cost difference is because jba uses a 409 stainless and are made in Mexico. They only give you 2 o2 extensions, bad clamps, bad gaskets, have a 3 bolt triangle flange, and are only offered without cats.

Arh are made in the US with a higher grade 304 stainless, include all 4 o2 extensions, good clamps, good gaskets, have a ball/socket connection, and are offered both with or without cats.

Arh fit better and are much easier to line up the mid pipes properly. The jba do work, but all the pro’s of Arh over jba are well worth the cost IMO.

 

[crackerjack1957]

After having run both, I will always stick with ARH. The cost difference is because jba uses a 409 stainless and are made in Mexico. They only give you 2 o2 extensions, bad clamps, bad gaskets, have a 3 bolt triangle flange, and are only offered without cats.

Arh are made in the US with a higher grade 304 stainless, include all 4 o2 extensions, good clamps, good gaskets, have a ball/socket connection, and are offered both with or without cats.

Arh fit better and are much easier to line up the mid pipes properly. The jba do work, but all the pro’s of Arh over jba are well worth the cost IMO.

Which Borla muffler comes with this cat back Kit?
http://www.moes-performance.com/Borla_Catback_Exhaust_09_up_Ram_1500_Dual_Rear_Exi_p/140307.htm

 

[jonathanhudaon]

Yeah Wish they were that cheap up here in Canada. That’s why I’m looking at the jba when a set of ARH is almost 3 grand!


Sent from my iPhone using Tapatalk

 

[Hemi450hp]

Which Borla muffler comes with this cat back Kit?
http://www.moes-performance.com/Borla_Catback_Exhaust_09_up_Ram_1500_Dual_Rear_Exi_p/140307.htm

That kit comes with the Borla Pro XS muffler.

 

[Wild one]

Yeah Wish they were that cheap up here in Canada. That’s why I’m looking at the jba when a set of ARH is almost 3 grand!


Sent from my iPhone using Tapatalk

There's quite a few trucks running around Alberta/Saskatchewan with JBA's,there's nothing wrong with them lasting here,and noticeably cheaper then either Kooks or ARH's. Hard to justify the cost of a set of either Kooks or ARH's in Canada. Make sure you get the 1 3/4's they fit better then the 1 7/8's do

 

[jonathanhudaon]

Yeah wild one that’s what I’m thinking about. There’s another used set I was looking at. They are actual jba’s dude wants a 1000


Sent from my iPhone using Tapatalk

 

[crackerjack1957]

That kit comes with the Borla Pro XS muffler.

Noticed on the Borla website they only have touring & s-type listed for Ram 1500 under cat back systems.
The Pro XS sound better than S-type?
Drone free?
Thanks