wiram
Senior Member
- Joined
- May 28, 2013
- Posts
- 194
- Reaction score
- 36
- Location
- Sparta, wisconsin
- Ram Year
- 2006, 1995
- Engine
- hemi 5.7, 5.2 318
Just wondering if anyone has any tips in installing them.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Ok so just pull that out check the diameter and if not an 1/8" drill it out and then place the hole at the 12 o'clock position
The thermostat in the picture looks to have the piddle valve installed. I always remove the rivet and if the bleed hole is smaller than 1/8" I'll drill it out to 1/8". Placing the hole in the high position.
Why is this rec'd?
Yep, it will lower the "heat" you get the winter. I also get a cel in my car with lower stat.
Sent from my LG-E970 using Tapatalk 2