danielrly
Member
Hello,
If anyone has any advice please jump in, I would value your input.
2013 Alpine unit
I am upgrading to -
Sub - Jl Audio W1v3 8" 4 ohm in OEM box
Sub Amp - Audio Control ACM 1.300 175w @ 4 ohms
Audio control AC-LGD 60 60ohm dummy load for stock unit to see.
No Amp
Dash - 3.5" Infinity Ref 3032 CFX 3ohms
Rear roof tweeter - JBL club 750T 3/4" 3 Ohms
I was going to upgrade the 6x9s in the doors, but from what I have gathered not much seems to be gained on the Alpine units. If I am wrong please let me know.
Was thinking about these three 6x9s
Kappa 93ix 6x9 front & rear
JBL GTO 939 front & rear
Kicker 46CSC6934 front & rear
Was hoping the Audio Control ACM 1.300 amp would be good using the woofer wires as inputs because they state repair for roll off
Some have said to just use the Pac Amp Pro AP4-CH41
AC AC-LGD 60 not sure if this is needed, for the amp dummy load.
i have been driving around with no sub in the truck and the unit is operating fine with the sub currently in my house.
If anyone has any advice please jump in, I would value your input.
2013 Alpine unit
I am upgrading to -
Sub - Jl Audio W1v3 8" 4 ohm in OEM box
Sub Amp - Audio Control ACM 1.300 175w @ 4 ohms
Audio control AC-LGD 60 60ohm dummy load for stock unit to see.
No Amp
Dash - 3.5" Infinity Ref 3032 CFX 3ohms
Rear roof tweeter - JBL club 750T 3/4" 3 Ohms
I was going to upgrade the 6x9s in the doors, but from what I have gathered not much seems to be gained on the Alpine units. If I am wrong please let me know.
Was thinking about these three 6x9s
Kappa 93ix 6x9 front & rear
JBL GTO 939 front & rear
Kicker 46CSC6934 front & rear
Was hoping the Audio Control ACM 1.300 amp would be good using the woofer wires as inputs because they state repair for roll off
Some have said to just use the Pac Amp Pro AP4-CH41
AC AC-LGD 60 not sure if this is needed, for the amp dummy load.
i have been driving around with no sub in the truck and the unit is operating fine with the sub currently in my house.