2013 morimoto hid lights keep getting low beam light error

[B.Torr5986]

I have the morimoto 9006 kit in my 2013 ram 1500 sport....i also have the mopar specific harness from them...yet i am still receiving the "low beam headlight error" on my dash!!!! Does anyone have any ideas on what it could be?

Thanks in advance!

Sent from my SPH-L710 using Tapatalk

 

[iam_canadian22]

I pretty sure the 13's require a different harness then the normal mopar specific harness, im sure jj will chime in soon and the harness' are also available from him

 

[B.Torr5986]

Yeah the place i bought them from said this was the harness because of the resistors on them....

Sent from my SPH-L710 using Tapatalk

 

[0212353]

Did ya nab 'em from me?

If no, where from? Direct from TRS, or another authorized retailer?

Do you have the 50w6ohm resistors on both sides?

 

[m.truitt527]

Hey JJ, that's my brother there, I helped him do the install. It was direct from TRS. It does have the resistors on each side.

 

[B.Torr5986]

Ya i bought them direct from TRS, Its funny it does not happen all the time, and it says my driver headlight is out but if you get out and look at it its actually not.

I have on order the 50W Ballasts because the 35W was not giving me the brightness i wanted from the 5K Bulbs.

 

[0212353]

are the resistors are getting hot?