2017 Ram with Rockford Fosgate Power Series

[Russ Clemons]

I’ve been preparing for this install for a long time, took a very long time to get my box from Netaudio. I think it will be worth the wait. Today is day 1 of the install, 3 installers for 12 hrs got a big majority done today.. I have high expectations of the finished product.

Rockford Fosgate
DSR-1
Power T1500/1
Power T600/4
Power T365 components
Power T169 coaxial
Power (2) T1D410 subs
All wires and rca Rockford Fosgate
Net Audio tall dual 10” box
D4900 XSPOWER Battery
Dual knobs

 

[WadXpress]

Awesome man. I hope it turns out how you want

 

[Russ Clemons]

Thank you sir!

 

[2010 Infantry Vet]

I have T265 door components, and the power 3 way 6x9s in my rear doors. They pound! You will be very happy with the T3 components. I have 170 rms going to each speaker. The rear door rockford 6x9’s and 6.5 front door components actually shake my rear view mirror. And I dont even have a sub, baffles, dynamat, or door sound deadening.

 

[Russ Clemons]

Infantry Vet did you have a problem with front of 6x9 hitting door panel? We had that problem yesterday. It’s the plastic that the molds around and holds tweetee. Thanks!

 

[BWL]

He has 6.25 components in the front vs 6X9.

 

[Russ Clemons]

I was referring to the power 6x9 in his rear doors he referenced, same speakers I’m using in same location. Thanks.

 

[BWL]

Gotcha. I misread.

 

[Russ Clemons]

No worries, thanks!

 

[2010 Infantry Vet]

No my rear door power 3 ways fit close, but cleared in the rear doors. Sounds like im lucky.

 

[adrianp89]

Sounds like a good plan... I am just curious why it is taking so long with 3 techs? I could get that done in 8 hours by my self (minus a full tune) Any deadning or anything?

 

[Russ Clemons]

No my rear door power 3 ways fit close, but cleared in the rear doors. Sounds like im lucky.

I should have gone 3 way but have 2 ways instead and had to shave a little. Worked out in the long run.

 

[Russ Clemons]

Sounds like a good plan... I am just curious why it is taking so long with 3 techs? I could get that done in 8 hours by my self (minus a full tune) Any deadning or anything?

1 guy was off and on but they made decent time. It took a while pulling all new wire to the doors. I didn’t want to run the T600/4 on factory wiring. Plus we had some big issues flashingvthe DSR1, found solution the 12volt forum anc kept moving.

 

[Russ Clemons]

So we made it through some flashing issues and firmware issues and it sounds pretty amazing. Wrong subs were sent, got T1 shallows on accident so I’m on temp subs till Tuesday when my T1’s show up. Mid bass is impressive, very happy so far.

 

[2010 Infantry Vet]

So we made it through some flashing issues and firmware issues and it sounds pretty amazing. Wrong subs were sent, got T1 shallows on accident so I’m on temp subs till Tuesday when my T1’s show up. Mid bass is impressive, very happy so far.

Glad to hear you got to listen to the mids and tweeters at least. I was blown away how good my $250. Rockford T2 6.5’s sounded. Sounds like i have an 8” sub hooked up, but i have zero subs. Just 6x9’s and 6.5’s. Rockford makes good speakers for the money. I wasnt impressed AT ALL with the JL audio C5 650’s compared to my T2’s.
Wait till yours break in. Will sound twice as good.

 

[2010 Infantry Vet]

I highly reccomend installing infinity kappa perfect 300m midranges in your dash, Instead of coaxials. Really makes the components come alive and sound perfect. They have a plus 1 cone so they are really 4” midranges. They barely fit, but are snug.

 

[Russ Clemons]

Heres a couple pics

 

[Russ Clemons]

XSPOWER battery and Power Series amps and crossovers behind back seat.

 

[2010 Infantry Vet]

Looks like they did a good job on the install. Hows the midbass on the T3 6.5’s and are the tweeters silk dome or aluminum? My T2 tweeters are aluminum.

 

[Russ Clemons]

Looks like they did a good job on the install. Hows the midbass on the T3 6.5’s and are the tweeters silk dome or aluminum? My T2 tweeters are aluminum.

Thanks, the midbass is great! Tweeters are a liquid crystal polymer and silk combination.