22" replicas wheels with 325/50/22 or will they rub?

[Koko]

Thinking about changing things up on my truck. I'm bored with it's current look. I'm thinking about these wheels
22" Replica Wheels

and these tires:

325 Kuhmos

I'm bad with offsets. I'm guessing I'll still need a spacer of some sort.

 

[Cruizer]

I can't speak to that setup, but you might get into trouble with the 325 tire width. I have 325/60R20 on a 10" wide wheel, not sure I'd want to see it on a 9" wide wheel. 325 comes out to a 13" wide tire. My offset is in the opposite direction, so I'm not sure where that would leave you for potential rubbing issues.

 

[Caldwell]

those are OE Rep wheels, I would be hard pressed that combo is gonna work, unless you got some wheel spacers, and atleast a level.

 

[Koko]

I've got leveling kit. I don't mind running spacers if I have too. It's more the worry now if if this tire would fit on a 9" wheel.

 

[carloslara57]

you should check out factory reproductions, they have the same r/t wheels but with more color schemes

 

[SIhemi]

I just put on srt replica wheels with 33/12.50r20. Had to use a 1/2 spacer because they were rubbing the upper control arm. I'm also leveled.