275/65/r20

[snoty]

I think it is the perfect size for stock or leveled suspension. I've got the Toyo's with Black Rhino rims and front Bilstein's at 2.8". The website Custom Offsets helped me out a lot in my research prior to purchasing. Afterwards I put my truck on the site hoping it might help others like you.

https://www.customwheeloffset.com/w...500-black-rhino-warlord-bilstein-leveling-kit

Sent from my Pixel 2 XL using Tapatalk

 

[LVnight1500]

The picture is actually stock suspension!
Since then I had it leveled with Bilsteins at 2.8 and Icon 1.5” rear coil springs:

Not to thread jack, but does anyone know if 305/55/R20 will fit on these stock wheels. I've been contemplating between this size and 275/65/R20. I have the bils set at 2.1 and 3/4" TGC spacers in the rear.

 

[Ravjay12]

Not to thread jack, but does anyone know if 305/55/R20 will fit on these stock wheels. I've been contemplating between this size and 275/65/R20. I have the bils set at 2.1 and 3/4" TGC spacers in the rear.

I believe on stock rims you will have slight rubbing on the control arms. You either have to get 1/4” spacers or at least a 0 offset rim. The problem isn’t the height, it’s the width of the tire.

 

[Frosty415]

I think it is the perfect size for stock or leveled suspension. I've got the Toyo's with Black Rhino rims and front Bilstein's at 2.8". The website Custom Offsets helped me out a lot in my research prior to purchasing. Afterwards I put my truck on the site hoping it might help others like you.

https://www.customwheeloffset.com/w...500-black-rhino-warlord-bilstein-leveling-kit

Sent from my Pixel 2 XL using Tapatalk

Looks awesome!! Yeah I just found out recently after watching basically every one of their vids that Custom Offsets is based out of Wisconsin and about an hour and a half drive from my house. My only issue with the 275/65/20 is that I am leaning toward the Falken Wildpeak AT3Ws and the acutal measurement of them is 34.1x10.6. My stock wranglers are a 10.8. I know its hardly a difference but I really didnt want to go smaller width. If I could get a 34.0 - 34.5 x 11.0 I'd be super happy but am having a hard time finding any that aren't ridiculously expensive.

 

[snoty]

I believe on stock rims you will have slight rubbing on the control arms. You either have to get 1/4” spacers or at least a 0 offset rim. The problem isn’t the height, it’s the width of the tire.

Nailed it. That 305 tire is only 33.2 tall but 305mm wide, 1.2" wider than the 275 we're discussing. Split the 1.2" difference, since half of it is going to the outside, and it is only 0.6" to the inside where it would rub your control arm.

 

[LVnight1500]

I think it is the perfect size for stock or leveled suspension. I've got the Toyo's with Black Rhino rims and front Bilstein's at 2.8". The website Custom Offsets helped me out a lot in my research prior to purchasing. Afterwards I put my truck on the site hoping it might help others like you.

https://www.customwheeloffset.com/w...500-black-rhino-warlord-bilstein-leveling-kit

Sent from my Pixel 2 XL using Tapatalk

Just wanted to be sure, but are these 18" rims or 20"? I'm guessing 18. Another decision I'm on the fence - 18" or 20" rims.

 

[snoty]

Looks awesome!! Yeah I just found out recently after watching basically every one of their vids that Custom Offsets is based out of Wisconsin and about an hour and a half drive from my house. My only issue with the 275/65/20 is that I am leaning toward the Falken Wildpeak AT3Ws and the acutal measurement of them is 34.1x10.6. My stock wranglers are a 10.8. I know its hardly a difference but I really didnt want to go smaller width. If I could get a 34.0 - 34.5 x 11.0 I'd be super happy but am having a hard time finding any that aren't ridiculously expensive.

Thanks. I doubt you'll be able to visually notice the difference. They are both 275s.

 

[Frosty415]

Nailed it. That 305 tire is only 33.2 tall but 305mm wide, 1.2" wider than the 275 we're discussing. Split the 1.2" difference, since half of it is going to the outside, and it is only 0.6" to the inside where it would rub your control arm.

While we are on the subject...does anyone know how much wider you can go without rubbing the UCA?? I've heard that it isn't much and I can see on my truck that it isn't but haven't actually measured. A 285 probably?? Without spacers and stock wheels anyways...

 

[Frosty415]

Just wanted to be sure, but are these 18" rims or 20"? I'm guessing 18. Another decision I'm on the fence - 18" or 20" rims.

Look at tires prices between 18s and 20s. Youll have your answer. Lol

 

[Frosty415]

Thanks. I doubt you'll be able to visually notice the difference. They are both 275s.

Yeah thats what I was thinking. I'm just skeptical about getting nice AT tires or something and paying a lot of money and it looking goofy with them being so narrow. But now that I've seen yours I feel much better about it

 

[HEMI_Finn]

I think it is the perfect size for stock or leveled suspension. I've got the Toyo's with Black Rhino rims and front Bilstein's at 2.8". The website Custom Offsets helped me out a lot in my research prior to purchasing. Afterwards I put my truck on the site hoping it might help others like you.


Sent from my Pixel 2 XL using Tapatalk

I'm generally not a fan of dark wheels, but IMHO you did a great job with your selections! Your truck looks very well done.

 

[Drunken Hamster]

I think it is the perfect size for stock or leveled suspension. I've got the Toyo's with Black Rhino rims and front Bilstein's at 2.8". The website Custom Offsets helped me out a lot in my research prior to purchasing. Afterwards I put my truck on the site hoping it might help others like you.

https://www.customwheeloffset.com/w...500-black-rhino-warlord-bilstein-leveling-kit

Sent from my Pixel 2 XL using Tapatalk

When you're a bro-dozer but are too self conscious to go 42's on 26's with a 12" suspension lift+4" body lift.

JK lol. This is actually the perfect "rugged" look. Imo, civilian trucks (work trucks are different) from the factory should come either like this with steps, or already 2/4 dropped with 305/50r20's and a good looking skirt and chin extension.

Just my $0.02

Sent from my magic 5-inch

 

[snoty]

When you're a bro-dozer but are too self conscious to go 42's on 26's with a 12" suspension lift+4" body lift.

JK lol. This is actually the perfect "rugged" look. Imo, civilian trucks (work trucks are different) from the factory should come either like this with steps, or already 2/4 dropped with 305/50r20's and a good looking skirt and chin extension.

Just my $0.02

Sent from my magic 5-inch

Haha, thanks. It now has nfab steps on it for the wife and kid.

Sent from my Pixel 2 XL using Tapatalk

 

[frachr]

Is anyone running this size on stock suspension? Any rubbing at all?


Sent from my LG-H812 using Tapatalk

 

[Frosty415]

Is anyone running this size on stock suspension? Any rubbing at all?


Sent from my LG-H812 using Tapatalk

There's a couple on this thread with stock suspension. I don't think it's an issue as long as you don't go wider.

 

[RamHemi2500]

I’m running 285/65/R20 on stock suspension. With a +1 offset. No rubbing.


Sent from my iPhone using Tapatalk

 

[RamHemi2500]

Some more


Sent from my iPhone using Tapatalk

 

[shadowhawk]

I think it is the perfect size for stock or leveled suspension. I've got the Toyo's with Black Rhino rims and front Bilstein's at 2.8". The website Custom Offsets helped me out a lot in my research prior to purchasing. Afterwards I put my truck on the site hoping it might help others like you.

Sent from my Pixel 2 XL using Tapatalk

Really nice looking truck Snoty! I think that's the exact suspension setup I'll run. I want to keep my factory wheels for now and level it.

I'm trying, really, but can't find the factory wheel offset, if someone could comment what that is.

 

[frachr]

The picture is actually stock suspension!
Since then I had it leveled with Bilsteins at 2.8 and Icon 1.5” rear coil springs:

When you where still at stock suspension, did you ever have any rubbing?

Sent from my LG-H812 using Tapatalk

 

[snoty]

Really nice looking truck Snoty! I think that's the exact suspension setup I'll run. I want to keep my factory wheels for now and level it.

I'm trying, really, but can't find the factory wheel offset, if someone could comment what that is.

Thanks. My truck came with the small 17" rims with tiny 31.5"ish tires.

Some more


Sent from my iPhone using Tapatalk

Looks good! I like that tire size and offset!!!