dapepper9
Senior Member
- Joined
- Feb 7, 2013
- Posts
- 5,908
- Reaction score
- 2,224
- Location
- Iowa/Nebraska Border
- Ram Year
- 2001
- Engine
- 5.9L V8
$450 for device and canned tune. You don't need the custom boost stuff until you get it all together
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Where exactly would I tap into to get oil to my turbo
Sent from my iPhone using Tapatalk
Oil pressure sender. Just use a brass T fitting in the sender hole, install sender on top of T with turbo feed line on the side
$450 for device and canned tune. You don't need the custom boost stuff until you get it all together
How do I wire the gym 2 bar map into my truck idk which wires go where
Sent from my iPhone using Tapatalk
They might be the same order. Colors look to be same order but that doesn't mean much.
Edit: ignore the arrow, just a generic photo from another thread. Arrow is pointing at TPS
And also what threads do I need to get to make an s bolt for my intake hat on my throttle body
Sent from my iPhone using Tapatalk
1/4" allthread
Do you know the thread pitch
Sent from my iPhone using Tapatalk
There's 3 wires you need to match up. Ground wire is easy but I'm unsure if the order of the other 2
Very bad idea. Injectors and map are both a fairly easy swap but are both very much tied into the tuning
Very bad idea. Injectors and map are both a fairly easy swap but are both very much tied into the tuning