Redtruck-VA
Senior Member
- Joined
- Jun 29, 2010
- Posts
- 5,864
- Reaction score
- 984
- Location
- Virginia
- Ram Year
- 2003 & 1989 D250 RWD
- Engine
- Hemi-5.7, 5.9 12v & 24v diesel
While digging through some old posts I found the spec for the OEM 6.1 cam.
It has been posted that it is 205/210 duration 542/526 116 lsa cam.
I heard folks using this cam for regrinds and even installed stock. The lsa cannot be changed but rhe profile can be modified. Installed stock it has been said the low end torque suffers, but picks up upper-mid and top end. Also said to be suitable for light trucks with 5 degrees advance, Anyone with real experience pls post.
It has been posted that it is 205/210 duration 542/526 116 lsa cam.
I heard folks using this cam for regrinds and even installed stock. The lsa cannot be changed but rhe profile can be modified. Installed stock it has been said the low end torque suffers, but picks up upper-mid and top end. Also said to be suitable for light trucks with 5 degrees advance, Anyone with real experience pls post.