UNBROKEN
Senior Member
- Joined
- Oct 28, 2012
- Posts
- 2,179
- Reaction score
- 866
- Ram Year
- 2012 Ram R/T
- Engine
- 5.7
I'm stumped on this one.
I swapped in a SSBC front big brake kit today and matching rear rotors. It's a straightforward swap up front....remove the calipers as a unit, swap rotors, install new calipers as a unit. No sensors were touched and all wiring looks to be fine to the eye. Same for the rear...simple rotor swap...nothing out of the ordinary.
Here's the issue....the stability control light on the lower right of the dash is on and the damned brake lights are stuck on.
If I knew what sensor or issue would cause that I could fix it a lot quicker....
Any help is appreciated.
I swapped in a SSBC front big brake kit today and matching rear rotors. It's a straightforward swap up front....remove the calipers as a unit, swap rotors, install new calipers as a unit. No sensors were touched and all wiring looks to be fine to the eye. Same for the rear...simple rotor swap...nothing out of the ordinary.
Here's the issue....the stability control light on the lower right of the dash is on and the damned brake lights are stuck on.
If I knew what sensor or issue would cause that I could fix it a lot quicker....
Any help is appreciated.