thrashie
Senior Member
- Joined
- May 22, 2013
- Posts
- 213
- Reaction score
- 76
- Location
- All Over
- Ram Year
- 2013 2500 Laramie
- Engine
- 6.7l cummins turbo diesel
What an simple and easy job...I ordered kit #60818 for the dodge ram.
woke up early thinking this was gonna be an all AM project, but it took longer to get everything together and jacked up, and run the lines than to actually install the bags themselves. total time, about an hour, or less....
key is, getting the frame jacked up and opening the springs.
not gonna show pic of the bags in the springs themselves but where I put the lines....didn't have to drill anything...just a couple of zip strips along the way and BOOM, done!
theres already 2 holes in the hitch receiver, couldn't be more perfect.
butt end of the truck sits way higher now too. (but I have air @ 35psi for the next 24hrs to test for leakage).
now i'm going for a drive!
woke up early thinking this was gonna be an all AM project, but it took longer to get everything together and jacked up, and run the lines than to actually install the bags themselves. total time, about an hour, or less....
key is, getting the frame jacked up and opening the springs.
not gonna show pic of the bags in the springs themselves but where I put the lines....didn't have to drill anything...just a couple of zip strips along the way and BOOM, done!
theres already 2 holes in the hitch receiver, couldn't be more perfect.
butt end of the truck sits way higher now too. (but I have air @ 35psi for the next 24hrs to test for leakage).
now i'm going for a drive!