myoung84
Senior Member
- Joined
- Dec 2, 2010
- Posts
- 1,899
- Reaction score
- 319
- Location
- Tulsa, OK
- Ram Year
- 2012 Power Wagon
- Engine
- Hemi 5.7L
I will be putting on my 2/4 Belltch drop kit this Saturday and will obviously have to have it aligned. What would be the best specs to align the front to other than stock? Maybe add a little more negative chamber? I drive the truck pretty hard and the outside edges of my tires show it, they are worn down a lot more than the inside edge, and I rotate every 5-6k miles.
Here are the specs from when I got it aligned after my front lift. They told me it was maxed out on the chamber and they could not bring it in any more. I'm sure the slight positive chamber does not help on the outside edge tire wear.
https://dl-web.dropbox.com/get/Public/Alignment.pdf?w=cbb07533
Here are the specs from when I got it aligned after my front lift. They told me it was maxed out on the chamber and they could not bring it in any more. I'm sure the slight positive chamber does not help on the outside edge tire wear.
https://dl-web.dropbox.com/get/Public/Alignment.pdf?w=cbb07533