Alright guys.. BILSTEINS post your pics!!!

[Bctexascrazy1]

They're 35x1250/20 Toyo mt, had to trim the back of inner fenders wells just barely, took me like 10 min. But worth it

 

[EvoNiner1986]

Bils set at 2.8 with some 315/70/17s!

 

[MaxSteelRam]

is that 5'7" or 6'4" bed? love that snowmobile in there

 

[Bep75]

I just called 4wheelparts about installing these to Bill Staines at 2.8 and he said you have to install new upper control arms because the ball joints will fall out because of control arms are at such an angle is this true?

Sent from my SM-N910T using Tapatalk

 

[Bep75]

I just called 4wheelparts about installing these to Bill Staines at 2.8 and he said you have to install new upper control arms because the ball joints will fall out because of control arms are at such an angle is this true?

Sent from my SM-N910T using Tapatalk

Sent from my SM-N910T using Tapatalk

 

[Steamer170]

Do the 5100's also come with new springs?

 

[Alaskanpeeps]

Do the 5100's also come with new springs?

Negative

 

[lippylu]

This my setup for now, Bils at 2.1 and running the 275/65R20 Wrangler Duratracs. Haven't found anything it really couldn't handle except for a random pot hole that knocked my alignment out. Winter is about to hit here in Alaska, so I'll be able to judge how she handles that soon. I'm pretty impressed with this setup so far except for my handling seems a bit on the soft side after I swapped tires. I did notice a few guys in the thread running these tires. What PSI do y'all have em set at?

 

[ppswampman]

bctexas what is that tire and wheel combo, looks awesome, exactly what I want mine to look like

 

[rpittman47]

is that 5'7" or 6'4" bed? love that snowmobile in there

It is a 6'4" bed with the quad cab. Ski-doo is about 10 and a half feet.

 

[RichieRich3030]

I ended up deciding on 2.8...

Before:


After:

 

[stimpy433]

Got mine installed last Friday, and aligned on Saturday..... now to get some more aggressive looking tires. I'm thinking I'll order some rear spacers cuz my front is just a little bit higher then the rear so some 3/4" or 1" spacers should cure it. Figure I'll drive it for a little while and see if the front settles any first.

Also, included my alignment sheet in case anyone is interested.

 

[Jerry70S]

I have the bilsteins set at 2.8 with a 1" spacer in the rear. Here is a before and after pic. Stock tires








295/65r20 toyo at2 on fuel trophy 20x9, -12 offset













Sent from my iPhone using Tapatalk

How far do your wheels stick out from the fender wells? This is the look I'm wanting on my 2016 1500


Sent from my iPhone using Tapatalk

 

[Ox69]

Got mine set on 2.8 w/ 20x10 -24 offset on 35" tires for now

 

[stimpy433]

Bilstein 5100's @ 2.8 with Nitto Terra Grappler G2's 295/60/20 on stock wheels.

 

[mattyk2188]

Bils & spacers go on tomorrow morning. Pay your respects to the low-lifestyle, it will not be missed


Sent from my iPhone using Tapatalk

 

[Jerry70S]

Got mine set on 2.8 w/ 20x10 -24 offset on 35" tires for now

That's just the bilsteins at 2.8 on 35's and nothing else? Looks good!


Sent from my iPhone using Tapatalk

 

[BogsRam14]

That's just the bilsteins at 2.8 on 35's and nothing else? Looks good!


Sent from my iPhone using Tapatalk

Looks like more than Bils @ 2.8..... His sig says zone 6" lift

 

[hemipwrd]

Here's mine the second time around (put the washer in the wrong spot the first time). Have them set at 2.1 and also changed out the rear shocks to the bilsteins as well.


Sent from my iPhone using Tapatalk

 

[Spoon91]

Hey Guys,
Noob question. Do the rear spacers for a 4X4 work on a 2WD as Well?