- Joined
- Dec 1, 2013
- Posts
- 12,803
- Reaction score
- 12,501
- Location
- Bristol , Tn.
- Ram Year
- 2014 4X4 QC Express 6 speed auto 355 differentials
- Engine
- 5.7 Hemi
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Looks good!!!...........really like those factory wheels
Just got done a few minutes ago. Took me almost 2 days, LOL.
2.8" 5100s in the front. Mevotech UCAs. 1" TGC spacers and 5100s in the rear.
I want to thank everyone here at these forums. It was hard work, but your posts were very helpful. Couldn't have gotten it done without you guys. THANK YOU!!!
View attachment 166431
Everything looks fine to me. This picture is the truck just sitting in the driveway. It's getting an alignment tomorrow at 10am. I have only driven it a few miles, but it rides sooooo much better now. I don't want to drive it too much until the alignment is done. I never go "off-roading" either. I have a Can Am 4x4 for that.
View attachment 166640
Everything looks fine to me. This picture is the truck just sitting in the driveway. It's getting an alignment tomorrow at 10am. I have only driven it a few miles, but it rides sooooo much better now. I don't want to drive it too much until the alignment is done. I never go "off-roading" either. I have a Can Am 4x4 for that.
View attachment 166640
Finally got around to having my Bilsteins installed after having them sitting in my garage since Christmas.
Bilstein 5100s on all 4 corners, fronts set to 2.8
PA 1.5 rear coil spacer
Currently sitting on stock rims and tires
BFG KO2 275/65R20 tires to come
Bottom pic is before, top is after Bils and PA spacer were installed.
View attachment 166841