Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
35 12.5 r 20 wheels are 20x10 thank you ..... thinking about changing the rear coil spacer from a 1.5 inch to a 1What size tires looks awesome!
Awesome thanks! Almost looks like a 4 inch suspension lift in the pics35 12.5 r 20 wheels are 20x10 thank you ..... thinking about changing the rear coil spacer from a 1.5 inch to a 1
Did you have to cut the lugs to fit the 1.5 wheel spacers ? Looks awesome!2.8, RC UCAs, Airlift 1000 rear, 1.5" wheel spacers, 35x12.5 Cooper ST Maxx. Zone 1.5" BL waiting to be installed when it warms up.
View attachment 190624
Also does it rub in the front with 35s and the 1.5 wheel spacers?2.8, RC UCAs, Airlift 1000 rear, 1.5" wheel spacers, 35x12.5 Cooper ST Maxx. Zone 1.5" BL waiting to be installed when it warms up.
View attachment 190624
Did you have to cut the lugs to fit the 1.5 wheel spacers ? Looks awesome!
Did you have to cut the lugs to fit the 1.5 wheel spacers ? Looks awesome!
Wheels spacers look great! Did you have to trim the lugs for the 1.5 wheel spacers or the wheels fit fine? ThanksFinally installed Bilstein 5100s front and rear. Set front at 2.1, left half inch rake. Put 1.5" supreme suspension spacers on. Great ride so far, feels more solid, planted. Bad pics with a Sloped Driveway.View attachment 186707
View attachment 186708
Yes, you have to nip the very end of the studs off with 1.5" spacers. It doesn't effect the threads, as it's not much material removed. I believe I made a post either in my build thread or started a new one. I'll do some digging. I know some of the 20s have depressions between the lug holes that are deep enough you don't need to trim.Wheels spacers look great! Did you have to trim the lugs for the 1.5 wheel spacers or the wheels fit fine? Thanks
Wheels spacers look great! Did you have to trim the lugs for the 1.5 wheel spacers or the wheels fit fine? Thanks
Looks good! Have you got an alignment yet? If not it will settle a little bit...View attachment 191129 just did mine today. Bilsteins set at 2.8 in the front and nothing in the rear. About 1/2 inch lower in the back. Probably will be adding a spacer in the near future
Not yet. Going to drive it a little tomorrow and going to get alignment Wednesday. I'm hoping it settles so I don't have to mess with the rear. Rides better than stock to me. Love it so far. Had about 2.5 inches of rake before bilsteins.Looks good! Have you got an alignment yet? If not it will settle a little bit...
Not yet. Going to drive it a little tomorrow and going to get alignment Wednesday. I'm hoping it settles so I don't have to mess with the rear. Rides better than stock to me. Love it so far. Had about 2.5 inches of rake before bilsteins.
View attachment 179466 Front bilsteins at 2.8, stock rear.
Ultra 20x9 +1 offset with 285/65/20 Falken wildepeaks. No rubbing but for some reason the lower front corner of my inner fender wells keep popping out at highway speeds and rub on the tires.
Very nice..... I want a ride!Bilstein front @ 2.8 / bilstein rear with 1.5 rear coil spacer
View attachment 188249
View attachment 188250
View attachment 188251