lowcomet
Senior Member
Hello all. Just signed up and I'm loving the DIY section on this forum compared to others, keep up the good work. Maybe I can contribute......
Bought a '12 Ram R/T Aug. 22nd and I ordered a Belltech 963SP kit from Dwayne at 3rd Strike.
I've got a few concerns that maybe can be put at ease.
1st: Belltech doesn't manufacture a drop kit for a '12 model Ram yet and I've seen that some of you guys have been successfully installing their kits. So my concern is what type of issues will I have if any installing this kit?
2nd: After researching I realized the 963SP is designed for the CC/QC models. My guess is the spring rate is different from that of a RC. Any opinions or facts? Will I have issues with this kit and a RCSB?
3rd: The center line of the rear axle needs correcting with a track bar relocator or adjustable pan hard bar correct? Just in case I did order a Spohn adjustable pan hard bar....Any and all feedback is greatly appreciated.
Bottomline: I just want my concerns put at rest whether positive or negative. Really worried that i screwed up with ordering this kit although 3rd Strike's webside advertised this 963SP kit for all cab/model configuration, if my memory serves me correctly.
Thanks all for your time and reply.
Bought a '12 Ram R/T Aug. 22nd and I ordered a Belltech 963SP kit from Dwayne at 3rd Strike.
I've got a few concerns that maybe can be put at ease.
1st: Belltech doesn't manufacture a drop kit for a '12 model Ram yet and I've seen that some of you guys have been successfully installing their kits. So my concern is what type of issues will I have if any installing this kit?
2nd: After researching I realized the 963SP is designed for the CC/QC models. My guess is the spring rate is different from that of a RC. Any opinions or facts? Will I have issues with this kit and a RCSB?
3rd: The center line of the rear axle needs correcting with a track bar relocator or adjustable pan hard bar correct? Just in case I did order a Spohn adjustable pan hard bar....Any and all feedback is greatly appreciated.
Bottomline: I just want my concerns put at rest whether positive or negative. Really worried that i screwed up with ordering this kit although 3rd Strike's webside advertised this 963SP kit for all cab/model configuration, if my memory serves me correctly.
Thanks all for your time and reply.