Steve1111
Junior Member
Hey guys, I am completely lost on this one. I cannot get the blower motor to work on my 2011 ram 3500. It has the automatic climate control in it. I already replaced the blower motor as well as the resistor. I checked every single fuse and relay. I took the tipm off and checked every single plug in it and nothing was burnt or looked damaged. I’m completely lost right now with this. I have 0 power making it to the 4 pin connector going to the resistor which in turn means no power to blower motor. Originally it started out constantly turning on and off on me and adjusting speeds then eventually it just shut off now and won’t work at all. Everything on the climate works. You can switch different modes and hear the doors open and close for different blends. There is just 0 power going to the blower motor. I have looked at all these videos of loose wires in the plugs for the tipm but all mine are fine. I’m about to give up and take it to a shop.