bruiserRAM
Senior Member
- Joined
- Mar 30, 2018
- Posts
- 211
- Reaction score
- 232
- Location
- Eastern Sierra, CA
- Ram Year
- 2017
- Engine
- 5.7L Hemi
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
The side filler panels were a muthafucka. The brackets were a pain, and there is a little camming tab that is pretty much BARELY big enough to secure the whole assemble to the plastic headlight surround. Took almost 2 hours to fiddlefuck them on. After that, the bumper was easy peasy.
As much As the dealer plate looked good during sunset...
View attachment 158010
I was happy to finally get my proper, CA Legacy plates!
View attachment 158011
View attachment 158012
Looks great! Let us know when your ready for some LED lights on that new bumper!
Soon...kinda torn on what to go with, both brand/cost and the actual types. Hard to justify the cost of most name brands going with what I want...which is:
Lightbar: single row, as blacked out as possible surrounding the LEDs, either 30" or 20" with good waterproof harness and connections. Many brands don't make a single row, let alone a blacked out one. Rough Country has one (but...not a big fan of RC). KC has their FLEX series which is AWESOME but awesomely expensive. Aurora Z (AKA, Black Oak LED) has a single row at a good price but lots of chrome and silver...
Pods: if I get the 20" bar, then I'll want 2 fog pods (maybe amber?) on either side of it, on the bumper. If I get the 30" there won't be room. Prob be good to stay in the same brand just for asthetics.
Bonus: A-pillar pods...spread beams of some kind to see off to the side a bit.
OR
Maybe I'll get 4 big round lights and mount them on top of the pre-runner bar??
Soon...kinda torn on what to go with, both brand/cost and the actual types. Hard to justify the cost of most name brands going with what I want...which is:
Lightbar: single row, as blacked out as possible surrounding the LEDs, either 30" or 20" with good waterproof harness and connections. Many brands don't make a single row, let alone a blacked out one. Rough Country has one (but...not a big fan of RC). KC has their FLEX series which is AWESOME but awesomely expensive. Aurora Z (AKA, Black Oak LED) has a single row at a good price but lots of chrome and silver...
Pods: if I get the 20" bar, then I'll want 2 fog pods (maybe amber?) on either side of it, on the bumper. If I get the 30" there won't be room. Prob be good to stay in the same brand just for asthetics.
Bonus: A-pillar pods...spread beams of some kind to see off to the side a bit.
OR
Maybe I'll get 4 big round lights and mount them on top of the pre-runner bar??