mod??
Ive been reading your posts on a couple of radio forums with interest, nice. Worlddx and radios reference forgot.?
Some good stuff I'm learning from you, cheers.
Ordered a Stryker 955 should be coming tomorrow . After i check it out for defects or issues ill do the resistor mod using a 15w solder iron and tweezers, wish me luck hahaha[emoji24]
Sent from my SM-T819Y using Tapatalk
What mod is that..Dont do it just yet...Most of that stuff is over volting the finals and does not do well for the redios..HOLD THE EFF ON!!!!!
With "ANY" new radio i would have it tested to be aligned and on freq ect.."CAREFUL" who you send the radio to cause most out there who call themselves techs dont have the proper gear to set them up or know enough about surface boards type radios..
Here is my 2cts worth.......Use what you have for now but send your 955 to mark sherman of fine tune cb..He is out in las crusis nm....He is on fb as his name above..My ant suggestion would be sirio 5000 WITH his lmr 240 coax mod and his water penetration fixes....Your radio will have to be set up for 10m/11m band as well....OH and ask him to tune with a ranger sra198 mic...Cheap noise cancelling and awsome sounding mic..
I wouldnt bother with an amp,with that set up i mentioned and marks work you should get 30 on am and almost world wide on sideband when skip is good..
If your radio has been looked at by a tech and all he has is a power meter and tells you its blastin out with a boatload of power(more than 80 watts tops)i wouldnt even turn it on....
Most just turn screws,spread coils and do all kinds of funky crap they learned online that doesnt do the radio any good at all....
Just go watch some of the vids on youtube by fine tune cb ..I have 3 strykers and i wouldnt let ANYONE else touchem..
As for the linear mentioned above by someone,he is correct in sayin its not legal but as long as your not being a dik (swaering,causeing a ton of assholery ect)you would be fine...Fcc will not be lookin for you at all..