open the arm rest & the cover to the 2nd storage area.
remove the top of the console, by taking the rubber pads out of the depressed areas.
Leave the cup holders intact, there are at least 2 or 3 screws under the rubber pads.
One of them is a Copper screw, remember where it goes.
2 screws are where my CB radio is now located
where you see the 3 short pieces of tape, is where the screws are.
Where the longer pieces of tape are, is where you grab the plastic & jerk up & a bit to the rear of the seat.
this is what it looks like under the console cover
there is one wire, it goes to the cigarette lighter & it is
short
The clips that you see along the 2 sides, are what mainly hold the cover down
this is the underside of the lid, the BLUE thing is the cigarette lighter
Now, you can take the radio surround off
There are 3 screws holding it in place, 2 under the pad on top of the dash & a 3rd screw is hidden near the 115 V AC outlet
The rest you can find on YouTube
& by asking.
I used more words than you would like