WhiteBighorn12
Member
- Joined
- Aug 12, 2013
- Posts
- 83
- Reaction score
- 7
- Location
- St. Charles, AR.
- Ram Year
- 2012
- Engine
- Hemi 5.7
So I decided to make my own CAI and ram air design. The intake is made from 3" and 4" PVC. 1 90° 3" elbow, 2 3" to 4" expansions/reducers, 3" and 4" PVC. I Cut the stock intake hose right after the first bend by the throttle body, and went to 3" PVC. Then I used the reducers to open it up to 4" for about 6", and them back down to 3" to connect to a 90° from the 90° I used 3" pipe to the air filter. This is for the CAI. It's a very crude write up but I'm gonna edit tomorrow and give better instructions for the intake and ram air design. It's all prefab right now until I can finalize lol. Here's a few pics