Hero6
Member
I am preparing to do a complete engine rebuild on my 99 5.9 4x4. Bought it recently as a third vehicle, but the compression in the two back cylinders is down to 70-80, so time to pull it out. Block, crank, rods and heads will be going to the machine shop
Looking for any advice on what to check/change/upgrade while I have the engine out and apart.
I know about the plenum issue and will take care of that. Any other modifications/upgrades suggested?
Not looking to hot rod it or anything, just my weekend driver, does have a big lift on it though with 38's
Thanks for any input you have....
Looking for any advice on what to check/change/upgrade while I have the engine out and apart.
I know about the plenum issue and will take care of that. Any other modifications/upgrades suggested?
Not looking to hot rod it or anything, just my weekend driver, does have a big lift on it though with 38's
Thanks for any input you have....