RaftingDave
Senior Member
Just an fyi....
Truck had been sitting in the hot sun and was oven temperature when we went out yesterday afternoon, so I rolled down the windows to blow the hot air out before turning on the AC. When I went to rollup, the one-touch on the driver's side didn't function - if I released the toggle, the window travel stopped.
One our way, my wife YouTubed this issue, and here was the solution (we got to our destination, tried it and it worked):
1) Lower the window all the way, holding the toggle all the way, and keep holding it two full seconds after the window is all the way down.
2) Raise the window all the way up, holding the toggle all the way, and keep holding it two full seconds after the window is all the way up.
3) Turn off the ignition.
4) Turn it back on.
Should work now.
Truck had been sitting in the hot sun and was oven temperature when we went out yesterday afternoon, so I rolled down the windows to blow the hot air out before turning on the AC. When I went to rollup, the one-touch on the driver's side didn't function - if I released the toggle, the window travel stopped.
One our way, my wife YouTubed this issue, and here was the solution (we got to our destination, tried it and it worked):
1) Lower the window all the way, holding the toggle all the way, and keep holding it two full seconds after the window is all the way down.
2) Raise the window all the way up, holding the toggle all the way, and keep holding it two full seconds after the window is all the way up.
3) Turn off the ignition.
4) Turn it back on.
Should work now.