PacificTiger
Junior Member
- Joined
- Jan 13, 2024
- Posts
- 3
- Reaction score
- 0
- Location
- Idaho
- Ram Year
- 2009
- Engine
- 5.7 Hemi (Jasper Motors)
I have read a few discussions on the issue I’m having. No one has a definitive answer on the issue. People have said it’s the Door Control Module, I tried three different DCMs, didn’t fix it. It may be a blown fuse, it’s not; the fuse is fine. It might be the door control switch, I bought a new one didn’t fix it. So I got a whole new door wiring harness. Still nothing.
I have found that there is power being conducted to the door control switch, but the buttons won’t work. I can roll down the rear windows and lock the controls for the rear windows because they’re hardwired in.
But I can’t roll down or up my front windows or lock or unlock the doors or use the power mirrors. The door control switch lights up meaning there’s power going to it. So I thought maybe the interior ground connection was bad at the kick plate on the driver side floor, I cleaned it and nothing happened.
So why can’t I use the front window controls? I am so lost, I’ve spent three days tearing apart my truck trying to find an issue and every single time I get the same conclusion. I’m clueless.
I have found that there is power being conducted to the door control switch, but the buttons won’t work. I can roll down the rear windows and lock the controls for the rear windows because they’re hardwired in.
But I can’t roll down or up my front windows or lock or unlock the doors or use the power mirrors. The door control switch lights up meaning there’s power going to it. So I thought maybe the interior ground connection was bad at the kick plate on the driver side floor, I cleaned it and nothing happened.
So why can’t I use the front window controls? I am so lost, I’ve spent three days tearing apart my truck trying to find an issue and every single time I get the same conclusion. I’m clueless.