- Joined
- Nov 5, 2016
- Posts
- 6,945
- Reaction score
- 19,150
- Location
- Maine
- Ram Year
- 2015
- Engine
- Pentastar 3.6 V6
found this. for the price I may have a new toy lol https://www.amazon.com/C-Zone-Anemo...coding=UTF8&psc=1&refRID=4JKK6R70XXNX0NX6EXSN
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
found this. for the price I may have a new toy lol https://www.amazon.com/C-Zone-Anemo...coding=UTF8&psc=1&refRID=4JKK6R70XXNX0NX6EXSN
How have you guys been cutting out the older model access panels? First thing I want to grab is a rotor-zip or die grinder but all I see in my mind is little pieces of plastic flying out my vents for the next 10 years. How does it work with a razor knife?
I just looked on E Bay and found several just ordered one meter $12.08Not bad at all for $16. Could come in handy in lots of situations. If you get one, let us know how it works.
wink
Good info. I'll have to get a hold of a anemometer. I'm interested to see also what different brands of blowers put out. Think my blower is getting weak.
Sent from my SM-N950U using Tapatalk
There are 3 blowers that I know of, very easy to replace, undo 3 bolts and a harness. The 3 OEM blowers also depend on your trim, whether or not you have atc, etc. Then there's also after market blowers.
Sent from my SM-N950U using Tapatalk
On mine, you take off the glovebox, and it's right there underneath the dash above is passenger floor board
Sent from my SM-N950U using Tapatalk
This is the meter I got off E Bay Cheap and does OK . I did a speed test on all speeds with and with out the CAF. It is on site here somewhere but can not find it lol sucks being old :OGood info. I'll have to get a hold of a anemometer. I'm interested to see also what different brands of blowers put out. Think my blower is getting weak.
Sent from my SM-N950U using Tapatalk
This is the meter I got off E Bay Cheap and does OK . I did a speed test on all speeds with and with out the CAF. It is on site here somewhere but can not find it lol sucks being old :O
https://www.ebay.com/itm/Air-Wind-S...epid=1934487692&hash=item4d77aa495d:rk:1:pf:0
How have you guys been cutting out the older model access panels? First thing I want to grab is a rotor-zip or die grinder but all I see in my mind is little pieces of plastic flying out my vents for the next 10 years. How does it work with a razor knife?
Yes they are.Are these in the diesels also?
Sent from my iPhone using Tapatalk
***It’s behind the glove box. You have to remove it to get at it.
Ram started putting the filter doors on with no filter in the 2016s. 2017s is when just about everyone was reporting that the door and filter was in place.What year did it become OEM?
I had to cut-out the grooved outline, buy the cover and the filter because it wasn't factory equipment in 2012.