2001ram15004x4
Junior Member
- Joined
- Jan 9, 2016
- Posts
- 20
- Reaction score
- 2
- Ram Year
- 2001
- Engine
- 5.9
Right. But no.
8 lug front and 5 lug rear.
Be like a big boobed chick with no ass.
Could I go with a Dana 70 and Dana 60?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Right. But no.
8 lug front and 5 lug rear.
Be like a big boobed chick with no ass.
Yes you could.
Sent from my iPhone using Tapatalk
I found a Dana 60 for the front but Id have to put the 4.10 gears in it but I could keep my rear axel because they are stronger right?
These are them.. Do they look in good shape to you?
Yes but it wouldn't hurt to pop the diff case and verify everything else is still good before you purchase them.
Sent from my iPhone using Tapatalk
So Id be good if I put on the Dana 60 rear and dana 70 front? I don't need to change anything else because of the new axels other than the gears do I?
So Id be good if I put on the Dana 60 rear and dana 70 front? I don't need to change anything else because of the new axels other than the gears do I?
70 and 80 are overkill though.
Or.... Dana 80.
Is it hard to change the 70 rear to 2.5 wide
not sure why you are looking to dump thousands into axles here..
if you are running 35's for your "daily driver" your stock axles are fine, especially with your 4.10's.
Thanks for all the help guys I think im going to go with dana 60s front and rear so I can have my 250ish pound ranch hand bumper and 35s without worry of breaking anything in the front