rollinon20inmts
Junior Member
Trying to color match the ugly woodgrain panels but dont know how to take them off. any help with this would be greatly appreciated!! thanks!
Help removing ugly woodgrain!!
- Thread starter rollinon20inmts
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
mrfyram1500
2024 1500 Laramie
I found a pic on ebay of the backside of panel. Looks like they are molded on. Try this link for the pic. Door Trim Panel Drivers Side Left 2007 2009 Dodge RAM 5KT551J3AC | eBay
mrfyram1500
2024 1500 Laramie
You would need to remove the entire radio bezel. Check this link for that pic. 2006 Dodge RAM Radio Bezel | eBay
rollinon20inmts
Junior Member
ok cool thanks!!
- Joined
- Jun 28, 2010
- Posts
- 1,286
- Reaction score
- 362
- Location
- Back in New York!
- Ram Year
- 2020
- Engine
- 6.7 Cummins
I just taped mine off and sanded a little before painting. Some people like the wood grain, might be a good idea to put them out there for swap first. I did and had a few bites, never followed through though, no-one else had the switch for the sliding rear window so it was too much of a pita.
mrfyram1500
2024 1500 Laramie
How did your wood grain removal go?
