DARKNHT
Senior Member
- Joined
- Oct 30, 2015
- Posts
- 357
- Reaction score
- 47
- Location
- Georgetown, IL
- Ram Year
- 2014
- Engine
- 5.7L Hemi
Hey guys,
I know we have a Strictly lowering a 4x4 thread, but I wanted to maybe create one just for the INEZ IHC Kit for the 4x4 platform. Somewhere people can ask install questions, share tips, insight or adjustments needed or performed during or after the install. As well as any upgrades done to their kit.
I have just received my kit, I'll get getting it out to powdercoat in the next week or so. Then trying to find time for install... I will make an install, thread when it goes together.
I am ordering QA1 TN709s for the rear shocks, and the Moog K80337 Stabilizer Link Kit for the front. I already have a Rancho RS7808MT front strut, and new KYB SM5580 mounts for the front assemblies.
One question I have for those with the kit that did the install. How much did you cut off the rear spring to get level at 4/6? I wanna cut this before sending out to powder, don't really want to cut again. I know in the video they say to do 1/2-3/4 of a coil and start there but just curious if the 4x4 guys with the kit are consistently cutting the same amount off or not.
I have the following to make up my drop;
INEZ IHC 4/6 kit
Rancho RS7808MT Front Struts
KYB SM5580 Front Strut Mounts
Moog K80337 Front Stabilizer Link
QA1 TN709 Rear Shock
Hellwig 7709 Rear Swaybar Kit
Dodge Off-Road Rear Trailling Arm Kit
Dodge Off-Road Rear Trackbar
Now lets see some of those awesome INEZ DROPS 4x4 drops
I know we have a Strictly lowering a 4x4 thread, but I wanted to maybe create one just for the INEZ IHC Kit for the 4x4 platform. Somewhere people can ask install questions, share tips, insight or adjustments needed or performed during or after the install. As well as any upgrades done to their kit.
I have just received my kit, I'll get getting it out to powdercoat in the next week or so. Then trying to find time for install... I will make an install, thread when it goes together.
I am ordering QA1 TN709s for the rear shocks, and the Moog K80337 Stabilizer Link Kit for the front. I already have a Rancho RS7808MT front strut, and new KYB SM5580 mounts for the front assemblies.
One question I have for those with the kit that did the install. How much did you cut off the rear spring to get level at 4/6? I wanna cut this before sending out to powder, don't really want to cut again. I know in the video they say to do 1/2-3/4 of a coil and start there but just curious if the 4x4 guys with the kit are consistently cutting the same amount off or not.
I have the following to make up my drop;
INEZ IHC 4/6 kit
Rancho RS7808MT Front Struts
KYB SM5580 Front Strut Mounts
Moog K80337 Front Stabilizer Link
QA1 TN709 Rear Shock
Hellwig 7709 Rear Swaybar Kit
Dodge Off-Road Rear Trailling Arm Kit
Dodge Off-Road Rear Trackbar
Now lets see some of those awesome INEZ DROPS 4x4 drops