Sergio Perez
Junior Member
- Joined
- Jul 23, 2019
- Posts
- 11
- Reaction score
- 14
- Location
- Angleton TX
- Ram Year
- 2014
- Engine
- 6.7l cummins
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Has anybody tried to install a Vp2rfp out of the jeep compass
It looks like it has Apple CarPlay and android auto but no cell phone service and The connector in the back looks the same this is a Late 2017 early 2018 radio only
Part # 68292822AJ
You could try the ram UAQ v18.14 file in post 8 if the compass 'application version' is earlier... No guaranteesSomeone has a link to update this radio part:68283240AI Jeep Compass limited 2018 uaq
I have the 17.43.01 files for 2014 non-Canadian truck. I can PM you a Google drive Link if you'd like to download it.Can anybody point me in the right direction for a 2014 RA4 software download? OTA update 17.43.01 bricked my unit and it’s stuck on the “Please insert USB with latest update to continue” or “There was a problem starting the head unit if problem occurs after ignition cycle contact dealer” screens. Every 2-3 months I will crank truck and radio will cut on and work fine until I turn truck off and then it will go back to that screen for months at a time again. UCONNECT website says I’m running the latest update so it won’t give me any software to try to flash. Any help is appreciated. Thanks in advance
Sent from my iPhone using Tapatalk
I have the 17.43.01 files for 2014 non-Canadian truck. I can PM you a Google drive Link if you'd like to download it.
Conversely, if you have the VIN number for the truck you can download it direct from UConnect's site (or at least you used to be able to).
Sent from my HTC U11 using Tapatalk
I found a what may be a later version of the TSB for the 2018 radios. The TSB is 08-016-19 REV. E dated October 4, 2019. It shows a new software version, 28.3, for WD & WK vehicles. Those are Durnago's and Grand Cherokee's respectively. I have the file UCONNECT_8.4_UCQ_MR28.3-CAN-WK,WD-MY18.zip.
Based on that rev E TSB , the 2018 ram UAQ is finally getting updated to application version 22.6 like the UAS did with rev D almost 5 months ago.I found a what may be a later version of the TSB for the 2018 radios. The TSB is 08-016-19 REV. E dated October 4, 2019. It shows a new software version, 28.3, for WD & WK vehicles. Those are Durnago's and Grand Cherokee's respectively. I have the file UCONNECT_8.4_UCQ_MR28.3-CAN-WK,WD-MY18.zip.
Based on that rev E TSB , the 2018 ram UAQ is finally getting updated to application version 22.6 like the UAS did with rev D almost 5 months ago.
Definitely need to find a source for those files too.
M² Mods.
If they operate like the RAx radios it should pick up the proper branding "if" it accepts the update as valid and flashes...I just got a notification for this thread and it reminded me of something. As some may remember, I was the first (or maybe second) to put a UAQ in a RAM by modifying the mounts on one from a 2017 300. I’ve been using that radio since, and it still works great. But, it has no RAM theme or splash screen and it bugs me. The cargo camera also doesn’t work. I’ve been reluctant to do anything for fear I’ll brick it, but I have a new daily driver so if my truck is without a radio for a bit while I find a replacement UAQ it won’t be a huge deal.
I think I’m going to download the UAQ file that was ousted and see if it will update to it.
If they operate like the RAx radios it should pick up the proper branding "if" it accepts the update as valid and flashes...
Sent from my HTC U11 using Tapatalk
He added a link to the australian forum, which has a login to mydrive and the files are there.
But Im not sure if they would flash to a UAx if they were made for UCx